1200°C Large Muffle Furnace (16 x 16 x 16", 64 L) with Digital Controller & Venting Port - KSL-1200X-L
1200°C Large Muffle Furnace (16 x 16 x 16", 64 L) with Digital Controller & Venting Port - KSL-1200X-L
SPECIFICATIONS
Structure
Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
The built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
1/4'' Barbed Gas Inlet/Outlet installed on the back of the furnace
An interlock is installed to cut off power as soon as the door is open
Heating Chamber
Dimension: 16 " x 16'' x 16'' (40x40x40 cm),
Capacity 64 liters/ 4100 cubic inches/ 2.37 cubic ft
Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
Power
208 - 240 VAC, 1 ph, 50/60Hz, 50 A
7.5KW
Power cord supplied without a plug
Please install a plug on your own or click the link below the picture to choose a plug according to your country or your lab requirement
Operating Temp Range
100-1100°C-Max. continuously
1200°C-Max. under an hour
Note: for using =>1000°C, the furnace block must be placed in front chamber, see picture below.
Stability at 1000oC
+/- 1oC
Uniformity at 1000oC
+/- 5oC
Max. Heating Rate
20°C/ min
Temperature Controller
FA-YD518P-AG temperature controller is included.
Proportional–integral–derivative control (PID control) and auto-tune function
30 segments programmed with ramping, cooling and dwelling steps
Built-in over-temperature alarm and thermocouple failure alarm
+/- 1 ºC temperature control accuracy
Default DB9 PC communication port
Temperature controller (optional)
MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
Laptop & software (Optional)
Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
Labview Based Temperature Control System (MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
A wireless remote control provides up to 300 meters of operating range.
Compliance
CE Certified
NRTL(UL61010) or CSA certification is available upon request at extra cost.
Application Notes
For longer furnace service life, and components, we recommend the heating rate not to exceed 10 °C /min.
The cooling rate shall also not exceed 10 °C /min.
This furnace lacks vacuum sealing, and toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
1200°C Large Muffle Furnace (16 x 16 x 16", 64 L) with Digital Controller & Venting Port - KSL-1200X-L—
$7,998.00
$2,799.30
More Images
1200°C Large Muffle Furnace (16 x 16 x 16", 64 L) with Digital Controller & Venting Port - KSL-1200X-L
SPECIFICATIONS
Structure
Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
The built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
1/4'' Barbed Gas Inlet/Outlet installed on the back of the furnace
An interlock is installed to cut off power as soon as the door is open
Heating Chamber
Dimension: 16 " x 16'' x 16'' (40x40x40 cm),
Capacity 64 liters/ 4100 cubic inches/ 2.37 cubic ft
Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
Power
208 - 240 VAC, 1 ph, 50/60Hz, 50 A
7.5KW
Power cord supplied without a plug
Please install a plug on your own or click the link below the picture to choose a plug according to your country or your lab requirement
Operating Temp Range
100-1100°C-Max. continuously
1200°C-Max. under an hour
Note: for using =>1000°C, the furnace block must be placed in front chamber, see picture below.
Stability at 1000oC
+/- 1oC
Uniformity at 1000oC
+/- 5oC
Max. Heating Rate
20°C/ min
Temperature Controller
FA-YD518P-AG temperature controller is included.
Proportional–integral–derivative control (PID control) and auto-tune function
30 segments programmed with ramping, cooling and dwelling steps
Built-in over-temperature alarm and thermocouple failure alarm
+/- 1 ºC temperature control accuracy
Default DB9 PC communication port
Temperature controller (optional)
MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
Laptop & software (Optional)
Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
Labview Based Temperature Control System (MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
A wireless remote control provides up to 300 meters of operating range.
Compliance
CE Certified
NRTL(UL61010) or CSA certification is available upon request at extra cost.
Application Notes
For longer furnace service life, and components, we recommend the heating rate not to exceed 10 °C /min.
The cooling rate shall also not exceed 10 °C /min.
This furnace lacks vacuum sealing, and toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
The built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
1/4'' Barbed Gas Inlet/Outlet installed on the back of the furnace
An interlock is installed to cut off power as soon as the door is open
Heating Chamber
Dimension: 16 " x 16'' x 16'' (40x40x40 cm),
Capacity 64 liters/ 4100 cubic inches/ 2.37 cubic ft
Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
Power
208 - 240 VAC, 1 ph, 50/60Hz, 50 A
7.5KW
Power cord supplied without a plug
Please install a plug on your own or click the link below the picture to choose a plug according to your country or your lab requirement
Operating Temp Range
100-1100°C-Max. continuously
1200°C-Max. under an hour
Note: for using =>1000°C, the furnace block must be placed in front chamber, see picture below.
Stability at 1000oC
+/- 1oC
Uniformity at 1000oC
+/- 5oC
Max. Heating Rate
20°C/ min
Temperature Controller
FA-YD518P-AG temperature controller is included.
Proportional–integral–derivative control (PID control) and auto-tune function
30 segments programmed with ramping, cooling and dwelling steps
Built-in over-temperature alarm and thermocouple failure alarm
+/- 1 ºC temperature control accuracy
Default DB9 PC communication port
Temperature controller (optional)
MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
Laptop & software (Optional)
Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
Labview Based Temperature Control System (MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
A wireless remote control provides up to 300 meters of operating range.
Compliance
CE Certified
NRTL(UL61010) or CSA certification is available upon request at extra cost.
Application Notes
For longer furnace service life, and components, we recommend the heating rate not to exceed 10 °C /min.
The cooling rate shall also not exceed 10 °C /min.
This furnace lacks vacuum sealing, and toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
Click here to choose a crucible
Click to order a heavy-duty mobile cart
