5-side Heating Muffle Furnace (16x16x16", 64L. 2.37 cu ft, 1200°C max.) - KSL-1200X-L5

KSL-1200X-L5 is a five-side muffle furnace with an enhanced uniform temperature zone, especially for the front and back sides. A SiC base plate is installed on the bottom of the chamber with a load capacity of 100 kg.

SPECIFICATIONS

Features	Five sides heating ( left, right, front, back, and bottom ) to achieve a more uniform temperature zone, , especially for the front and back sides. A SiC base plate is installed on the bottom of the chamber with a load capacity of 100 kg. 30-segment PID temperature controller Dual thermocouples design for overheating and thermocouple failure alarm Alumina fiber insulated heating chamber for better thermal insulation and more energy efficiency.  Heavy-duty double-layer structure with cooling fans to keep furnace exteriors safe to touch.  Built-in vent port at the top
Power	AC 208 - 240V, three-phase, 50/60Hz, 40 A 12KVA Note:  Power cable included, but without a plug.
Heating Chamber	Chamber size: 16'x16"x16"   ( 400 x400x400 mm)  Capacity:   2,25 cubic foot, ( ~64 L) Five sides heating by NiCrAl resistance coils Max. loading: 100 Kg
Operating Temp Range	100-1100°C, continuously 1200°C, under an hour
Stability at 1000oC	+/- 1°C
Uniformity at 1000oC	+/- 3°C @300°C and 1000°C in the center 300 × 300 × 300mm area
Max. Heating Rate	20°C/ min
Temperature Controller	A digital temperature controller is included. Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1ºC temperature control accuracy The default DB9 PC communication port
Optional	Eurotherm 3000 series Temperature Controller is available upon request. This package includes a Eurotherm temperature controller, a communication cable (RS485-USB), and a software CD. Alumina Saggar as crucibles
Software	Complementary LabVIEW-Based Temperature Control System (MTS03) enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
Gas Inlet and Outlet	A 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available at extra cost.
Application Notes	This furnace is not vacuum-sealed; toxic or explosive materials and gases are not recommended for use with this furnace without the necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence, and the cracks may be repaired with alumina coating