1200C Muffle Furnace (12"x8"x5", 7.2L) with Vent Port & Quartz Window - KSL-1200X

• High-purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency. 
• Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch. 
• A vent port (22mm) installed on top doubles as an outlet for gas flow.
• A 0.5" diameter observation window made of quartz glass allows the user to see inside the chamber.
• A gas fill tube is included which can be installed to replace the observation window
• A protection latch is installed to prevent accidental explosive damage
• An interlock is installed to cut off power as soon as the door is open
• The fibrous heating module is replaceable at a low cost ( click the pic below right to order )
• The optional Al203 sample plate can also be ordered for this furnace.
• A hybrid box/tube furnace is available as the Pic below right ( click to order )

             

• 208 -240V Single Phase 50/60 Hz
• 3.5 kW
• Note: Power cable included without a plug. Please install a plug by yourself or click the link below the picture to choose a plug according to your country or your lab requirement

• FA-YD518P-AG temperature controller is included.
• Proportional–integral–derivative control (PID control) and auto-tune function
• 30 segments programmed with ramping, cooling, and dwelling steps
• Built-in over-temperature alarm and thermocouple failure alarm
• +/- 1 ºC temperature control accuracy
• Default DB9 PC communication port

• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
• Labview Based Temperature Control System (MTS01)enables the user to edit temperature profile, manage heat-treatment recipes, and record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters of operating range.
• Note: The software is only compatible with MTI’s Temperature Controller

• You may upgrade the temperature controller to the Eurotherm Temperature Controller, which can provide
• +/- 0.1oC accuracy
• This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller

• Stainless steel tube (5 mm Dia) with flange is included which can be installed as a gas inlet port
• Also, the hole can be used as feedthrough to calibrate temperature or measure the electrical property of a sample

     

Compliance

   

• CE Certified
• NRTL or CSA certification is available upon request at extra cost. (pls click mark below to learn details)

• The cooling rate shall also not exceed 10 °C /min.
• This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
• Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
• Click the pic left to choose a crucible