🚚 Free Worldwide Shipping on All Orders!Shop Now

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6

GSL-1200X-MGI-6 is a six channels 50mm O.D. tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. It is an excellent tool to research the phase diagram of new generation material.

SPECIFICATIONS:

Furnace Structure	The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allow heat treatment under vacuum or flowing gas Processing six batches of samples with different temperatures at compact space
Heating Element	Ni-Cr-Al- resistance wire
Working Temperature	Max.Working Temperature 1200°C
Processing Tube	High purity quartz tube with Φ50X L 460 mm, 6 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump is required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Six digital Programmable Temperature Controllers built-in Includes over-temperature and broken thermal couple alert. 6 channel heating tube is controlled independently by 24 segments programmable temperature controller 6 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heaters by one Laptop.
Heating Rate	20°C/ min Max.
Temperature Accuracy	+/- 1.0 °C
Power & Working Voltage	10 KW, 208 - 240V single phase, 50/60Hz (if 6 heating modules operate at the same time) Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.

$12,245.10

Original: $34,986.00

-65%

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6—

$34,986.00

$12,245.10

More Images

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6 - Image 2

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6

GSL-1200X-MGI-6 is a six channels 50mm O.D. tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. It is an excellent tool to research the phase diagram of new generation material.

SPECIFICATIONS:

Furnace Structure	The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allow heat treatment under vacuum or flowing gas Processing six batches of samples with different temperatures at compact space
Heating Element	Ni-Cr-Al- resistance wire
Working Temperature	Max.Working Temperature 1200°C
Processing Tube	High purity quartz tube with Φ50X L 460 mm, 6 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump is required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Six digital Programmable Temperature Controllers built-in Includes over-temperature and broken thermal couple alert. 6 channel heating tube is controlled independently by 24 segments programmable temperature controller 6 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heaters by one Laptop.
Heating Rate	20°C/ min Max.
Temperature Accuracy	+/- 1.0 °C
Power & Working Voltage	10 KW, 208 - 240V single phase, 50/60Hz (if 6 heating modules operate at the same time) Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.

Product Information

Shipping & Returns

Description

GSL-1200X-MGI-6 is a six channels 50mm O.D. tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. It is an excellent tool to research the phase diagram of new generation material.

SPECIFICATIONS:

Furnace Structure	The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allow heat treatment under vacuum or flowing gas Processing six batches of samples with different temperatures at compact space
Heating Element	Ni-Cr-Al- resistance wire
Working Temperature	Max.Working Temperature 1200°C
Processing Tube	High purity quartz tube with Φ50X L 460 mm, 6 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump is required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Six digital Programmable Temperature Controllers built-in Includes over-temperature and broken thermal couple alert. 6 channel heating tube is controlled independently by 24 segments programmable temperature controller 6 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heaters by one Laptop.
Heating Rate	20°C/ min Max.
Temperature Accuracy	+/- 1.0 °C
Power & Working Voltage	10 KW, 208 - 240V single phase, 50/60Hz (if 6 heating modules operate at the same time) Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.

1200C Max 6 Channel Tube Furnace (50mm Quartz Tube) for Hi-Throughput Annealing - GSL-1200X-MGI-6 | MTI Online Store