🚚 Free Worldwide Shipping on All Orders!Shop Now
250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE
HomeStore

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE

CIP60-DIE is a Complete CIP Die Set (Max. 250 MPa Vessel) for Cold Isostatic Press, which has a 60mm ID x 160mm depth chamber up to 250 MPa. It is an excellent tool for preparing 2“ ceramic sample with a much high density.

Specifications:
Hydraulic cylinder pressure 0 - 85 T
(100 T hydraulic press is required)
CIP Vessel size
  • 60 I.D. x 160D. mm (Effective Depth ~80mm)
  • Die total height is 340 mm with the top pushing rod
  • 330 ml hydraulic oil required - ~ 40mm to top
Vessel Pressure
  • 0 - 250 MPa
  • Warning: sealing rubber O-ring is consumable, and need replacing as the suggest as the table below
  • 10 pcs sealing O-rings are included for replacement. Spare O-ring is available upon request
Gauge Displayed Pressure Value (MPa) Recommended Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)  56.5  72  84.7
CIP Die Pressure (MPa) vs 6 CM ID Vessel  200  255  300
O-Ring life for replacement > 10 time  10 times  3 times







Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
Die Sleeve, Upper Die Core 
and two handles 
 Die Cavity (60mm I.D) 
filled with hydraulic oil
100 T Electric Hydraulic Press
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 60 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

$8,698.00
250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE—
$8,698.00

More Images

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE - Image 2

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE

CIP60-DIE is a Complete CIP Die Set (Max. 250 MPa Vessel) for Cold Isostatic Press, which has a 60mm ID x 160mm depth chamber up to 250 MPa. It is an excellent tool for preparing 2“ ceramic sample with a much high density.

Specifications:
Hydraulic cylinder pressure 0 - 85 T
(100 T hydraulic press is required)
CIP Vessel size
  • 60 I.D. x 160D. mm (Effective Depth ~80mm)
  • Die total height is 340 mm with the top pushing rod
  • 330 ml hydraulic oil required - ~ 40mm to top
Vessel Pressure
  • 0 - 250 MPa
  • Warning: sealing rubber O-ring is consumable, and need replacing as the suggest as the table below
  • 10 pcs sealing O-rings are included for replacement. Spare O-ring is available upon request
Gauge Displayed Pressure Value (MPa) Recommended Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)  56.5  72  84.7
CIP Die Pressure (MPa) vs 6 CM ID Vessel  200  255  300
O-Ring life for replacement > 10 time  10 times  3 times







Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
Die Sleeve, Upper Die Core 
and two handles 
 Die Cavity (60mm I.D) 
filled with hydraulic oil
100 T Electric Hydraulic Press
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 60 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

Product Information

Shipping & Returns

Description

CIP60-DIE is a Complete CIP Die Set (Max. 250 MPa Vessel) for Cold Isostatic Press, which has a 60mm ID x 160mm depth chamber up to 250 MPa. It is an excellent tool for preparing 2“ ceramic sample with a much high density.

Specifications:
Hydraulic cylinder pressure 0 - 85 T
(100 T hydraulic press is required)
CIP Vessel size
  • 60 I.D. x 160D. mm (Effective Depth ~80mm)
  • Die total height is 340 mm with the top pushing rod
  • 330 ml hydraulic oil required - ~ 40mm to top
Vessel Pressure
  • 0 - 250 MPa
  • Warning: sealing rubber O-ring is consumable, and need replacing as the suggest as the table below
  • 10 pcs sealing O-rings are included for replacement. Spare O-ring is available upon request
Gauge Displayed Pressure Value (MPa) Recommended Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)  56.5  72  84.7
CIP Die Pressure (MPa) vs 6 CM ID Vessel  200  255  300
O-Ring life for replacement > 10 time  10 times  3 times







Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
Die Sleeve, Upper Die Core 
and two handles 
 Die Cavity (60mm I.D) 
filled with hydraulic oil
100 T Electric Hydraulic Press
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 60 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE | MTI Online Store