🚚 Free Worldwide Shipping on All Orders!Shop Now
High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310
HomeStore

High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310

High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310

This is an SS310S tube vessel that can be used under oxidation, inert, or reduction gas atmosphere up to 900°C for special compounds processing. Such a tube is also suitable for use with MTI tube furnaces to create a system that satisfies ultra-high vacuum or high-pressure HIP (hot isostatic pressure) applications. It is an ideal vessel for researching the new generation materials at low cost.

Specification:

Model Number Tube-HP-SS-60-52-1000 Tube-HP-SS-80-70-1000 Tube-HP-SS-100-90-1000
Outside Diameter: 60 mm 80 mm 100 mm 
Inside Diameter:  52 mm 70 mm 90 mm
Tube Length:             1000 mm
Flanges
 
  • CF type flange with Copper O-ring in two ends
  • High pressure needle valves are included
  • 1/4NPS refale connector in two ends 
Working Temp.
  • 800°C continuous (without load)
  • 900°C max.for < 1hr  
Working Pressure
          &
Temperature:
Max.pressure
 Max temp
30 PSI (  0.2 MPa) 900°C
391 PSI  (2.7 Mpa)   800°C
464 PSI  (3.2 Mpa)   700°C
551 PSI  (3.8 Mpa)   600°C
623 PSI  (4.3 Mpa)   500°C
Max.pressure Max temp
20 PSI (  0.15MPa ) 900°C
362 PSI  (2.5 Mpa) 800°C
420 PSI  (2.9 Mpa)  700°C
507 PSI  (3.5 Mpa)  600°C
565 PSI  (3.9 Mpa)  500°C
Max.pressure Max temp
275 PSI  (1.9 Mpa)  800°C
333 PSI  (2.3 Mpa) 700°C
391 PI  (2.7 Mpa) 600°C
449 PI  (3.1 Mpa) 500°C
Installation
  • Thoroughly clean the copper gasket before use
  • Use torque adjustable wrench to tighten the flange properly
  •  
        
  • Warning: 
    • Regularly run visual inspection on the tube surface. The high-pressure vessel is the consumable part, please replace the tube once deformation is noticed.
    • Must install a pressure regulator on gas cylinder side to regulate pressure.
    • Service-life design for 2,000 hours at 800C. 
    Attention:
    • In order get longer tube service life, Please use quartz or alumina crucible to carry the sample, instead of loading sample directly inside the tube, please click the picture below to choose one crucible boat:
               

    Optional Accessories
    • A torque wrench is available here to avoid overtightening the flange bolts
    • High-pressure relief valve with pre-set safe pressure
    • High-temperature pressure transmitter to read pressure
    •    
             Adjustable and Reusable High Pressure Relief Valve 1000 - 10,000 PSI (7 - 70 Mpa) - HIP-RV10-LD
        

     

    Select Outer Diameter
    From $1,256.15

    Original: $3,589.00

    -65%
    High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310—

    $3,589.00

    $1,256.15

    High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310

    This is an SS310S tube vessel that can be used under oxidation, inert, or reduction gas atmosphere up to 900°C for special compounds processing. Such a tube is also suitable for use with MTI tube furnaces to create a system that satisfies ultra-high vacuum or high-pressure HIP (hot isostatic pressure) applications. It is an ideal vessel for researching the new generation materials at low cost.

    Specification:

    Model Number Tube-HP-SS-60-52-1000 Tube-HP-SS-80-70-1000 Tube-HP-SS-100-90-1000
    Outside Diameter: 60 mm 80 mm 100 mm 
    Inside Diameter:  52 mm 70 mm 90 mm
    Tube Length:             1000 mm
    Flanges
     
    • CF type flange with Copper O-ring in two ends
    • High pressure needle valves are included
    • 1/4NPS refale connector in two ends 
    Working Temp.
    • 800°C continuous (without load)
    • 900°C max.for < 1hr  
    Working Pressure
              &
    Temperature:
    Max.pressure
    		 Max temp
    30 PSI (  0.2 MPa) 900°C
    391 PSI  (2.7 Mpa)   800°C
    464 PSI  (3.2 Mpa)   700°C
    551 PSI  (3.8 Mpa)   600°C
    623 PSI  (4.3 Mpa)   500°C
    Max.pressure Max temp
    20 PSI (  0.15MPa ) 900°C
    362 PSI  (2.5 Mpa) 800°C
    420 PSI  (2.9 Mpa)  700°C
    507 PSI  (3.5 Mpa)  600°C
    565 PSI  (3.9 Mpa)  500°C
    Max.pressure Max temp
    275 PSI  (1.9 Mpa)  800°C
    333 PSI  (2.3 Mpa) 700°C
    391 PI  (2.7 Mpa) 600°C
    449 PI  (3.1 Mpa) 500°C
    Installation
    • Thoroughly clean the copper gasket before use
    • Use torque adjustable wrench to tighten the flange properly
    •  
          
    • Warning: 
      • Regularly run visual inspection on the tube surface. The high-pressure vessel is the consumable part, please replace the tube once deformation is noticed.
      • Must install a pressure regulator on gas cylinder side to regulate pressure.
      • Service-life design for 2,000 hours at 800C. 
      Attention:
      • In order get longer tube service life, Please use quartz or alumina crucible to carry the sample, instead of loading sample directly inside the tube, please click the picture below to choose one crucible boat:
                 

      Optional Accessories
      • A torque wrench is available here to avoid overtightening the flange bolts
      • High-pressure relief valve with pre-set safe pressure
      • High-temperature pressure transmitter to read pressure
      •    
               Adjustable and Reusable High Pressure Relief Valve 1000 - 10,000 PSI (7 - 70 Mpa) - HIP-RV10-LD
          

       

      Product Information

      Shipping & Returns

      Description

      This is an SS310S tube vessel that can be used under oxidation, inert, or reduction gas atmosphere up to 900°C for special compounds processing. Such a tube is also suitable for use with MTI tube furnaces to create a system that satisfies ultra-high vacuum or high-pressure HIP (hot isostatic pressure) applications. It is an ideal vessel for researching the new generation materials at low cost.

      Specification:

      Model Number Tube-HP-SS-60-52-1000 Tube-HP-SS-80-70-1000 Tube-HP-SS-100-90-1000
      Outside Diameter: 60 mm 80 mm 100 mm 
      Inside Diameter:  52 mm 70 mm 90 mm
      Tube Length:             1000 mm
      Flanges
       
      • CF type flange with Copper O-ring in two ends
      • High pressure needle valves are included
      • 1/4NPS refale connector in two ends 
      Working Temp.
      • 800°C continuous (without load)
      • 900°C max.for < 1hr  
      Working Pressure
                &
      Temperature:
      Max.pressure
      		 Max temp
      30 PSI (  0.2 MPa) 900°C
      391 PSI  (2.7 Mpa)   800°C
      464 PSI  (3.2 Mpa)   700°C
      551 PSI  (3.8 Mpa)   600°C
      623 PSI  (4.3 Mpa)   500°C
      Max.pressure Max temp
      20 PSI (  0.15MPa ) 900°C
      362 PSI  (2.5 Mpa) 800°C
      420 PSI  (2.9 Mpa)  700°C
      507 PSI  (3.5 Mpa)  600°C
      565 PSI  (3.9 Mpa)  500°C
      Max.pressure Max temp
      275 PSI  (1.9 Mpa)  800°C
      333 PSI  (2.3 Mpa) 700°C
      391 PI  (2.7 Mpa) 600°C
      449 PI  (3.1 Mpa) 500°C
      Installation
      • Thoroughly clean the copper gasket before use
      • Use torque adjustable wrench to tighten the flange properly
      •  
            
      • Warning: 
        • Regularly run visual inspection on the tube surface. The high-pressure vessel is the consumable part, please replace the tube once deformation is noticed.
        • Must install a pressure regulator on gas cylinder side to regulate pressure.
        • Service-life design for 2,000 hours at 800C. 
        Attention:
        • In order get longer tube service life, Please use quartz or alumina crucible to carry the sample, instead of loading sample directly inside the tube, please click the picture below to choose one crucible boat:
                   

        Optional Accessories
        • A torque wrench is available here to avoid overtightening the flange bolts
        • High-pressure relief valve with pre-set safe pressure
        • High-temperature pressure transmitter to read pressure
        •    
                 Adjustable and Reusable High Pressure Relief Valve 1000 - 10,000 PSI (7 - 70 Mpa) - HIP-RV10-LD
            

         

        You may also like

        -65%NEW
        Thumbnail 1Thumbnail 2

        SS316 Alloy Processing Tube with Flange, Optional 25/38 /50/76 mm O.D, - TSS-316

        $950.00

        $332.50

        NEW
        Thumbnail 1

        Hi-Pressure Super Alloy Tube: 100 OD x 82 ID x 1200 L (mm) w/ CF Flanges, 1100oC Max. - Tube-HP-100-82

        $24,985.00

        -65%NEW
        Thumbnail 1Thumbnail 2

        Hi-Pressure Super Alloy Tube with Flange: OD30x ID12x L580 (mm), Max.1100oC - Tube-HP-30-12-580

        $6,000.00

        $2,100.00

        -65%NEW
        Thumbnail 1

        Hi-Pressure Super Alloy Tube with Flanges: OD 60x ID 52 x L1000 (mm), Max.100oC -TGH60D1000

        $15,998.00

        $5,599.30

        -65%NEW
        Thumbnail 1Thumbnail 2

        Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000

        $26,986.00

        $9,445.10

        -65%NEW
        Thumbnail 1Thumbnail 2

        Hi-Pressure Super Alloy Tube with flange KIT, 55 ODx20 IDx580 L (mm) , 1100oC Max. - Tube-HP-55-20-580

        $19,985.00

        $6,994.75

        -65%NEW
        Thumbnail 1

        5" SS310 Alloy Tube for MTI Two Zone Rotary Tube Furnace - TSSR5-N

        $3,498.00

        $1,224.30

        -65%NEW
        Thumbnail 1Thumbnail 2

        Ti Vessel (1100 ml) with 6 1/4" Feedthrough Ports for VBF-600Ti - RC-Ti1100FT6

        $4,995.00

        $1,748.25

        -65%NEW
        Thumbnail 1

        Ni-Based Superalloy High Pressure Hydro-thermal Reactor 1100C Max, Optional Volume 65ml &100ml - RC-Ni100-V

        $10,985.00

        $3,844.75

        -65%NEW
        Thumbnail 1

        Ni-Based Superalloy High Pressure Hydro-thermal Reactor 1100C Max, Optional 300ml & 500ml - RC-Ni500-V

        $9,998.00

        $3,499.30

        NEW
        Thumbnail 1

        SS304 Alloy Processing Tube, Optional 25/38/50/76 mm O.D. - TSS-LD

        $825.00