1500C Atmosphere Controlled Induction Melting - Granulating/Casting Furnace (5kg) - IMCS-1500G

• Input Voltage: 208 - 240V AC, Three Phases
• Max. Current: 60A
• Output: 20 KW

• One set of standard graphite crucible is included for melting and granulating ( pls click the picture below for dimensions)
• Pic 1: Graphite Crucible ~ 750 ml for induction melting.
• Pic. 2: Graphite adaptor with 0.8 mm hole for granulation by quenching into water casting
• Pic. 3. Graphite rod for switching casting
• Customized crucible dimension is available upon request at the extra cost

Pic. 1Pic. 2 Pic. 3

• Accommodates flasks 5'' diameters x 9" high 
• The flask is swiveled out from the bottom of the crucible chamber to enable easy insertion and removal of flasks
• Flask is driven by compressive gas > 150 PSI. The compressive air pump is required, but not included. You may click the link below to order:

• Max.Working temperature 1500ºC
• S-type thermocouple allows the user to closely control and monitor the temperature with the most accurate readings
• PID digital temperature controller to ensure temperature stability with accuracy of +/- 2 oC.
• Bottom-pour design of the crucible ensures minimal temperature drop in metal casting during the crucible to flask transfer

• A double-stage rotary vane vacuum pump is included with this casting system
• The vacuum gauge and handle provide easy monitoring of vacuum pressure
• 5N high-purity Ar Gas is required for melting and casting

Water Cooling

• 16L/ min water flow
•  Please click the picture below to order if you need a recirculating water chiller
  

• Attention: A pressure regulator must be installed on your input gas tank ( click the picture below to review ) and have the output gas pressure set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition. Gas buildup with pressure levels exceeding 3 PSI may cause irreversible damage to the furnace chamber.
• Never heat the furnace while the gas release valve is closed, and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damage.