šŸšš Free Worldwide Shipping on All Orders!Shop Now
40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE
HomeStore

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

YLJ-40TA-PE is an electric lab press up to 40 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers toĀ use the press inside the glovebox.
Ā 
Specifications:

MotorizedĀ  Hydraulic Pump

Ā 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • One pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch screenĀ electric pump

An electric hydraulic pump with a touch screen controller is available upon request at an extra cost, which can set all parameters, such as the inner diameter of the pressing die, target pressure, pressing time, and then touch the button to go.

Please click the picture to the left to review specs and order

Ā 
Max. PressureĀ 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
Ā Pressure Accuracy
  • Ā±0.5MPa in high pumping speed Ā±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the gauge (MPa)

6

13

19

26

32

39

46

53

Force on Hydraulic Cylinder (T)

5

10

15

20

25

30

35

40

P = TĀ x gĀ x 10/ (Ļ€r^2)
    • P:Ā pressure (Mpa) applied to your working piece
    • T:Ā force (metric ton)Ā applied to the pressure vessel cylinder
    • g: standard gravity. g ā‰ˆ 9.8 m/s2
    • Ļ€: ~3.14
    • r: radiusĀ (cm)Ā of the pressure vessel (1.5 cm)
    • *1000Ā KgĀ =Ā 1Ā MetricĀ Ton;Ā 1Ā MpaĀ =Ā 10Ā Kg/cm2
Operation Temperature
  • 10 - 40Ā°C
Overall DimensionĀ 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean theĀ moldĀ via ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
Ā 
  • Warning: Customers must always wear protective gogglesĀ during operation !!!


Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc

Ā 

$3,148.25

Original: $8,995.00

-65%
40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PEā€”

$8,995.00

$3,148.25

More Images

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE - Image 2
40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE - Image 3

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

YLJ-40TA-PE is an electric lab press up to 40 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers toĀ use the press inside the glovebox.
Ā 
Specifications:

MotorizedĀ  Hydraulic Pump

Ā 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • One pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch screenĀ electric pump

An electric hydraulic pump with a touch screen controller is available upon request at an extra cost, which can set all parameters, such as the inner diameter of the pressing die, target pressure, pressing time, and then touch the button to go.

Please click the picture to the left to review specs and order

Ā 
Max. PressureĀ 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
Ā Pressure Accuracy
  • Ā±0.5MPa in high pumping speed Ā±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the gauge (MPa)

6

13

19

26

32

39

46

53

Force on Hydraulic Cylinder (T)

5

10

15

20

25

30

35

40

P = TĀ x gĀ x 10/ (Ļ€r^2)
    • P:Ā pressure (Mpa) applied to your working piece
    • T:Ā force (metric ton)Ā applied to the pressure vessel cylinder
    • g: standard gravity. g ā‰ˆ 9.8 m/s2
    • Ļ€: ~3.14
    • r: radiusĀ (cm)Ā of the pressure vessel (1.5 cm)
    • *1000Ā KgĀ =Ā 1Ā MetricĀ Ton;Ā 1Ā MpaĀ =Ā 10Ā Kg/cm2
Operation Temperature
  • 10 - 40Ā°C
Overall DimensionĀ 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean theĀ moldĀ via ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
Ā 
  • Warning: Customers must always wear protective gogglesĀ during operation !!!


Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc

Ā 

Product Information

Shipping & Returns

Description

YLJ-40TA-PE is an electric lab press up to 40 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers toĀ use the press inside the glovebox.
Ā 
Specifications:

MotorizedĀ  Hydraulic Pump

Ā 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • One pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch screenĀ electric pump

An electric hydraulic pump with a touch screen controller is available upon request at an extra cost, which can set all parameters, such as the inner diameter of the pressing die, target pressure, pressing time, and then touch the button to go.

Please click the picture to the left to review specs and order

Ā 
Max. PressureĀ 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
Ā Pressure Accuracy
  • Ā±0.5MPa in high pumping speed Ā±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the gauge (MPa)

6

13

19

26

32

39

46

53

Force on Hydraulic Cylinder (T)

5

10

15

20

25

30

35

40

P = TĀ x gĀ x 10/ (Ļ€r^2)
    • P:Ā pressure (Mpa) applied to your working piece
    • T:Ā force (metric ton)Ā applied to the pressure vessel cylinder
    • g: standard gravity. g ā‰ˆ 9.8 m/s2
    • Ļ€: ~3.14
    • r: radiusĀ (cm)Ā of the pressure vessel (1.5 cm)
    • *1000Ā KgĀ =Ā 1Ā MetricĀ Ton;Ā 1Ā MpaĀ =Ā 10Ā Kg/cm2
Operation Temperature
  • 10 - 40Ā°C
Overall DimensionĀ 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean theĀ moldĀ via ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
Ā 
  • Warning: Customers must always wear protective gogglesĀ during operation !!!


Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc

Ā 

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE | MTI Online Store