🚚 Free Worldwide Shipping on All Orders!Shop Now
Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement - EQ-DX-100G-LD
HomeStore

Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement - EQ-DX-100G-LD

Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement - EQ-DX-100G-LD

The EQ-DX-100G is a desktop X-Ray diffractometer used for analyzing the orientation of all single crystal types in two-theta angles from 10° - 140°. The built-in single wavelength filter ensures the emission of a monochromatic X-Ray wavelength (Kα) with +/- 15” angle accuracy. Designed with precision and compactness in mind, this desktop X-Ray machine provides the ideal solution for crystal research labs, substrate manufacturers, and wafer quality control facilities. 

Specifications:

 Features
  • Simple Operation: With an understanding of Bragg's law, an individual can learn the machine operation within minutes
  • Precision: Crystal orientation can be determined accurately within +/- 15" (0.0046°)
  • Safety: Low X-Ray emission, automatic shutter, and lead foil cover reduce exposure to radiation
  • Cost Effective: Features comparable to more expensive X-Ray diffractometers

 Power Supply / Power
  • Input AC 208 - 240V, 50Hz/ 60Hz selectable, 250W (50Hz is available upon request; the power plug is NOT included,)
  •  For 110V, 500W Transformer is required for this diffractometer
  • The high voltage power supply is a discrete unit along with the diffractometer

 X-Ray Tube
  • Cu target, air cooling, Cu-Kα wavelength
  • X-Beam size: 1 mm width x 10 mm length
  • X-Ray tube with a monochromatic wave (Kα) filter improves accuracy
  • Scintillation detector reduces harmful X-Ray radiation
  • The X-Ray tube is a consumable part with 2 years warranty. The additional X-ray tube is available (See Table Standard Package of Machine below for price)

Monochromatic Filter Scintillation Tube 

 Max. Tube Current
  •  5 mA at 35kV

 X-Ray Detector
  •  Max. Voltage at 1050V

 Measure Range
 
Graduated Platform
  •  
     2 Theta: 10° ~ 140°, Theta : 10° ~ 70° 

 Accuracy
  •  Digital display with measurement accurate within +/- 15" (0.0046°)

 Sample Holder
  • One spring load wafer holder is included for holding a flat wafer or substrate smaller than 2" (See Fig.1 Fig.2)
  • One ceramic vacuum suction plate is included for holding a flat wafer or substrate larger than 2" (See Fig.3 Fig.4) 
  • A 6mm OD tube is required for the compression fitting on the back of the vacuum suction plate (See Fig.3)
Substrate Sample Holder
Fig.1 Substrate Sample Holder Fig.2 Mounting Substrate Fig.3 Vaccum Suction Plate Fig.4 Large Wafer Example with Pump

 Optional Parts
  • A Vacuum Pump is required for using a vacuum suction plate
  • A V-type Crystal Boule Holder is required for boule orientation measurement
  •  
  • Vacuum Pump  Boule Holder with Sample 

 Radiation Protection
  • Built-in automatic shutter prevents operation with the cover opened
  • Lead foil reinforced plastic cover reduces radiation leaking
  • Warning: The cover must be CLOSED during operation
  • The radiation level outside of the operating unit is measured as 0.07 uSv/h, which is the same as the background level, indicating good radiation protection from the unit
  • safe radiation level outside the operating unit
Compliance
  •  CE Certified

 Appending links for 
 X-ray diffractometer

Standard Package of Machine:

 P/N

 Description ( included in standard package)

 Qty

 Thumb
 DX-101  SiO2 (10x10) Single Crystal Standard Sample for Calibration  1  
 DX-102  X-ray Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-104  G-type Sample Holder for Measuring Crystal Substrates (pre-installed in the machine)  1  
 DX-105  Scintillator Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-106  Amplifier IC Board (pre-installed in the machine)  1  
 DX-110  Operation Manual  1  

Optional:

DX-103

V-type Sample Holder for Measuring Crystal Boules up to 3" diameter

  1  

EQ-OFP-14

120L/min Oillless Vacuum Pump

  1

 

 

$13,995.10

Original: $39,986.00

-65%
Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement - EQ-DX-100G-LD—

$39,986.00

$13,995.10

Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement - EQ-DX-100G-LD

The EQ-DX-100G is a desktop X-Ray diffractometer used for analyzing the orientation of all single crystal types in two-theta angles from 10° - 140°. The built-in single wavelength filter ensures the emission of a monochromatic X-Ray wavelength (Kα) with +/- 15” angle accuracy. Designed with precision and compactness in mind, this desktop X-Ray machine provides the ideal solution for crystal research labs, substrate manufacturers, and wafer quality control facilities. 

Specifications:

 Features
  • Simple Operation: With an understanding of Bragg's law, an individual can learn the machine operation within minutes
  • Precision: Crystal orientation can be determined accurately within +/- 15" (0.0046°)
  • Safety: Low X-Ray emission, automatic shutter, and lead foil cover reduce exposure to radiation
  • Cost Effective: Features comparable to more expensive X-Ray diffractometers

 Power Supply / Power
  • Input AC 208 - 240V, 50Hz/ 60Hz selectable, 250W (50Hz is available upon request; the power plug is NOT included,)
  •  For 110V, 500W Transformer is required for this diffractometer
  • The high voltage power supply is a discrete unit along with the diffractometer

 X-Ray Tube
  • Cu target, air cooling, Cu-Kα wavelength
  • X-Beam size: 1 mm width x 10 mm length
  • X-Ray tube with a monochromatic wave (Kα) filter improves accuracy
  • Scintillation detector reduces harmful X-Ray radiation
  • The X-Ray tube is a consumable part with 2 years warranty. The additional X-ray tube is available (See Table Standard Package of Machine below for price)

Monochromatic Filter Scintillation Tube 

 Max. Tube Current
  •  5 mA at 35kV

 X-Ray Detector
  •  Max. Voltage at 1050V

 Measure Range
 
Graduated Platform
  •  
     2 Theta: 10° ~ 140°, Theta : 10° ~ 70° 

 Accuracy
  •  Digital display with measurement accurate within +/- 15" (0.0046°)

 Sample Holder
  • One spring load wafer holder is included for holding a flat wafer or substrate smaller than 2" (See Fig.1 Fig.2)
  • One ceramic vacuum suction plate is included for holding a flat wafer or substrate larger than 2" (See Fig.3 Fig.4) 
  • A 6mm OD tube is required for the compression fitting on the back of the vacuum suction plate (See Fig.3)
Substrate Sample Holder
Fig.1 Substrate Sample Holder Fig.2 Mounting Substrate Fig.3 Vaccum Suction Plate Fig.4 Large Wafer Example with Pump

 Optional Parts
  • A Vacuum Pump is required for using a vacuum suction plate
  • A V-type Crystal Boule Holder is required for boule orientation measurement
  •  
  • Vacuum Pump  Boule Holder with Sample 

 Radiation Protection
  • Built-in automatic shutter prevents operation with the cover opened
  • Lead foil reinforced plastic cover reduces radiation leaking
  • Warning: The cover must be CLOSED during operation
  • The radiation level outside of the operating unit is measured as 0.07 uSv/h, which is the same as the background level, indicating good radiation protection from the unit
  • safe radiation level outside the operating unit
Compliance
  •  CE Certified

 Appending links for 
 X-ray diffractometer

Standard Package of Machine:

 P/N

 Description ( included in standard package)

 Qty

 Thumb
 DX-101  SiO2 (10x10) Single Crystal Standard Sample for Calibration  1  
 DX-102  X-ray Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-104  G-type Sample Holder for Measuring Crystal Substrates (pre-installed in the machine)  1  
 DX-105  Scintillator Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-106  Amplifier IC Board (pre-installed in the machine)  1  
 DX-110  Operation Manual  1  

Optional:

DX-103

V-type Sample Holder for Measuring Crystal Boules up to 3" diameter

  1  

EQ-OFP-14

120L/min Oillless Vacuum Pump

  1

 

 

Product Information

Shipping & Returns

Description

The EQ-DX-100G is a desktop X-Ray diffractometer used for analyzing the orientation of all single crystal types in two-theta angles from 10° - 140°. The built-in single wavelength filter ensures the emission of a monochromatic X-Ray wavelength (Kα) with +/- 15” angle accuracy. Designed with precision and compactness in mind, this desktop X-Ray machine provides the ideal solution for crystal research labs, substrate manufacturers, and wafer quality control facilities. 

Specifications:

 Features
  • Simple Operation: With an understanding of Bragg's law, an individual can learn the machine operation within minutes
  • Precision: Crystal orientation can be determined accurately within +/- 15" (0.0046°)
  • Safety: Low X-Ray emission, automatic shutter, and lead foil cover reduce exposure to radiation
  • Cost Effective: Features comparable to more expensive X-Ray diffractometers

 Power Supply / Power
  • Input AC 208 - 240V, 50Hz/ 60Hz selectable, 250W (50Hz is available upon request; the power plug is NOT included,)
  •  For 110V, 500W Transformer is required for this diffractometer
  • The high voltage power supply is a discrete unit along with the diffractometer

 X-Ray Tube
  • Cu target, air cooling, Cu-Kα wavelength
  • X-Beam size: 1 mm width x 10 mm length
  • X-Ray tube with a monochromatic wave (Kα) filter improves accuracy
  • Scintillation detector reduces harmful X-Ray radiation
  • The X-Ray tube is a consumable part with 2 years warranty. The additional X-ray tube is available (See Table Standard Package of Machine below for price)

Monochromatic Filter Scintillation Tube 

 Max. Tube Current
  •  5 mA at 35kV

 X-Ray Detector
  •  Max. Voltage at 1050V

 Measure Range
 
Graduated Platform
  •  
     2 Theta: 10° ~ 140°, Theta : 10° ~ 70° 

 Accuracy
  •  Digital display with measurement accurate within +/- 15" (0.0046°)

 Sample Holder
  • One spring load wafer holder is included for holding a flat wafer or substrate smaller than 2" (See Fig.1 Fig.2)
  • One ceramic vacuum suction plate is included for holding a flat wafer or substrate larger than 2" (See Fig.3 Fig.4) 
  • A 6mm OD tube is required for the compression fitting on the back of the vacuum suction plate (See Fig.3)
Substrate Sample Holder
Fig.1 Substrate Sample Holder Fig.2 Mounting Substrate Fig.3 Vaccum Suction Plate Fig.4 Large Wafer Example with Pump

 Optional Parts
  • A Vacuum Pump is required for using a vacuum suction plate
  • A V-type Crystal Boule Holder is required for boule orientation measurement
  •  
  • Vacuum Pump  Boule Holder with Sample 

 Radiation Protection
  • Built-in automatic shutter prevents operation with the cover opened
  • Lead foil reinforced plastic cover reduces radiation leaking
  • Warning: The cover must be CLOSED during operation
  • The radiation level outside of the operating unit is measured as 0.07 uSv/h, which is the same as the background level, indicating good radiation protection from the unit
  • safe radiation level outside the operating unit
Compliance
  •  CE Certified

 Appending links for 
 X-ray diffractometer

Standard Package of Machine:

 P/N

 Description ( included in standard package)

 Qty

 Thumb
 DX-101  SiO2 (10x10) Single Crystal Standard Sample for Calibration  1  
 DX-102  X-ray Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-104  G-type Sample Holder for Measuring Crystal Substrates (pre-installed in the machine)  1  
 DX-105  Scintillator Tube for DX-100 X-ray Machine (pre-installed in the machine)  1  
 DX-106  Amplifier IC Board (pre-installed in the machine)  1  
 DX-110  Operation Manual  1  

Optional:

DX-103

V-type Sample Holder for Measuring Crystal Boules up to 3" diameter

  1  

EQ-OFP-14

120L/min Oillless Vacuum Pump

  1