Desktop Precision Diamond Wire Saw for 2"x2" Area With Touch Screen Control - STX-202A

• Wire Saw Control Unit: Universal 110V to 240VAC, 50/60Hz, 200W max. 

• Heavy-duty aluminum alloy structure with compact size
• automatically controlled Y-axis by the digital panel
• single wire swing cutting with adjustable wire length from 5-15mm (broken wire still can be used)
• Transparent plastic plates are included to prevent Coolant splashing
• Add an oil refill cup behind the forming tube, please apply 10-15 drops Anti-Wear Oil before first-time use
• Wire spooler motor, 3 Amps, Torque = 1.8Nm

• Z-axis: 50mm, automatically controlled by the digital panel
• Y-axis: 50mm, automatically controlled by the digital panel
• Two-dimension sample stage built-in 360° degree horizontal rotating and +/-10° tilting via manual operation

     

• Feed Speed: 0.01 mm/min to 40 mm/min adjustable
• Back Speed: 1 mm/min to 100 mm/min adjustable
• Spooler spin speed: 1-260 RPM adjustable
• Cutting depth: 0.1 - 50mm
• Positional accuracy: +/- 0.01 mm 
• Please click the picture left to see the samples cut by this machine

• Please click the picture below to view the meteorite samples that were cut by our wire saws.

Fig. 1      Fig. 2  Fig. 3 Fig. 4

• Color touchscreen controller will setup wire travel speed, cutting speed and slicing width

   

• ≤ 15 meters used for each installation
• One spool of 0.35mm Dia x 20 meters length Diamond Wire is included for immediate use
• A Diamond Blade Dressing Stone is included for keeping the wire sharp
• Optional:
  • For slicing or dicing very brittle crystal, you may order 0.125mm Dia. Diamond Wire. Note that 0.125mm Dia. The wire is very easy to break, please reduce the feeding rate to the minimum. Click the picture below to order spare diamond wires 
  • For longer wire life, please use LubeCool -150 Smart Solid Lubricant and Coolant

For better lighting, please consider a Fiber Optic Y-shape Dual Light Microscope Illuminator

           

• Standard: steel spring wire tension system with break wire alarm is included

• One water pump is included for cooling diamond wire during cutting
• You must use anti-corrosive oil or radiator water as coolant (could buy from any auto store)
• Warning: must clean the machine after each cutting, especially using tap water as the coolant to prevent rust
•        

• Swing & Rotation Sample Fixture: Such fixture needs an independent controller for its parameter settings such as swing frequency/ angle (±23°, up to 20 swings/min), rotating speed, and rounds (30rpm max.) Higher cutting surface quality can be expected by swinging or rotating the specimen throughout the cutting process. Please click Pic.2 &3 and video to learn more details. The fixture will enhance cutting speed up to 2 times
•  Protective case is available at extra cost, see Pic.4

                                                             

• The flow rate of the coolant is adjustable by the valve in the blue feeding tubing. Please adjust it properly to improving cutting performance
• Please use the correct cutting fluid. Don't use tap water 
• Must clean the machine after each use
• Wire saws applications
• The wire saw can be placed inside the glovebox with N2 gas via feedthrough at an extra cost