Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000

MSK-USP-6000 is a lab-scale spray dryer that generates fine particles by evaporating the atomized liquid spray and that has been collected through the cyclone separating process. It is suitable for synthesizing heat-sensitive materials for a broad range of applications, including pharmaceuticals, Nanotechnology, Catalysts, Fuel cells, and Batteries.

SPECIFICATIONS

System Features		A dual-channel spray nozzle with an anti-clogging function prevents the nozzle from being clogged during the spray process Transparent receiving tank, drying chamber, and cyclone separator for easy process monitoring Borosilicate glass chamber resists strong acid/alkali and high-temperature The use of quick clamps allows easy component removal and cleaning  The included air compressor is quiet (50dB) and clean (oil-mist-free) Digital control panel Built-in PID temperature controller for accurate Inlet/outlet air temperature control The user-friendly control panel enables easy adjustment of temperature, airflow & pressure, pumping speed, and anti-clogging interval Solvent feeding via a peristaltic pump, the rate is adjustable
Input Voltage & Power		208~240VAC, 30 A, 50/60 Hz 6000 VA
Spray Nozzle (Atomizer)		Compress gas-assist spray nozzle disperses spray liquid into fine droplets which are subsequently dried in the chamber The dual-channel design allows the mixing and spraying of two kinds of solutions at the same time Anti-clogging nozzle, auto anti-clogging interval adjustable Co-current downward spray Atomized particle sizes range from 10 - 50 μm Spray Nozzle Size is 0.7mm Dia. Recommended slurry viscosity is less than 500 cP.
Cyclon Material Collector		Material collection efficiency can be as high as 80%. Collect Capacity: 500 mL
Temperature Control		Inlet air: 30C - 300 °C Outlet air: 30C - 140 °C Max. working Temperature: 250 °C PID temperature controller with ±1 °C accuracy
Drying Time		1~1.5S
Drying Air		One oil-less air compressor is included 35m^3 /h Pressure: 5~8 bar
Peristaltic Pump		The solvent is fed by the peristaltic pump Feeding rate adjustable: 30-2200ml/h
Evaporation Capability		Max. 1500ml/h
Certification		CE Certified NRTL or CSA certification is available upon request