2 in 1 Sheet and Roll to Roll Ultrasonic Spray Pyrolysis Coating System - MSK-USP-R2R

MSK-USP-R2R is a Lab-Scale Roll to Roll Ultrasonic Spray Pyrolysis Coating System, which integrates the swing ultrasonic spray head, the heat-able platform with a vacuum chuck, the digital syringe pump, and roll to roll device together. It is cost-effective equipment to explore the production flexibility for new generation materials of the solar cell, battery, and flexible electronics

SPECIFICATIONS

Ultrasonic Spraying	40KHz ( 220VAC/130W) ultrasonic generator and two spraying nozzles are included. Two spray nozzles are made of Titanium alloy (Ti-6Al-4V) with a KF25 adaptor One cylindrical type - provides a narrower spray pattern ~2 cm diameter One cone type - provides a wider spray pattern ~4 cm diameter One Compressive air vortex shaper for spray nozzles is included KF25 quick clamp is included to connect the spray head to the KF25 port  Max. temperature  70oC Spraying speed:  5 mL/min~ 40 mL/min  0.3L/hr -  2.4L / hr.) Fluid viscosity range: 1 - 50 mPa·s (cP)
Swing Fixture	The swing fixture is installed on top of the heatable platform The ultrasonic nozzle is installed on the swing fixture The oscillation speed is adjustable by the digital controller Fixture movement distance: 50 – 270 mm  Please Click the Picture left to see the details
Syringe Pump	Digital infusion syringe pump for precise solution feeding Max Pumping rate: 1500 mL/hr with a syringe A 20ml syringe is included for immediate use Dimension: 220mm (L) x 145mm (W) x 130mm (H) Infuses Only, does not withdraw, volume target, or have a computer interface.
Heatable Vacuum Bed	Vacuum Bed (chuck) for holding the substrate in flat with dimensions: 600mm (L) x 300mm (W)  The vacuum Bed is heatable up to 120ºC for solution drying The digital temperature controller with the precision of +/- 1ºC 208 - 240 VAC, single phase, 50/60Hz 2000W Max Power
Roll-to-Roll System	Compact roll-to-roll system up to 200mm width  Motor rpm (Controller display) Range: 1 ~ 41 rpm Gear Head's reduction ratio: 100k Actual substate traverse speed range: 2.2 mm/s ~ 117.2 mm/s 24 VDC
Dimension	Heatable vacuum bed with the roll to roll system and the stand Total dimensions: 805mm (L) x 435mm (W) x 565mm (H) The height of the vacuum bed: 180 mm The height of the needle holder: 385 mm
Warranty & Compliance	One-year limited warranty with lifetime support CE certified NRTL certification is available upon request
Optional	You need to place the system into a fume hood to protect the environment. Click the pic 1 below to order You may add another set of  R2R devices to peel the protective layer and add another layer       Pic. 1      Pic. 2      Pic. 3
Operation Demo Video