12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203
12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203
Unipol-1203 is a 12" polisher designed for chemical mechanical polishing. The polishing parts are utilized anti-corrosive materials in order to avoid chemical corrosion. Two working stations are equipped along with an automatic slurry feeder and high precision polishing fixture to meet the processing requirements.
Fully automatic control panel to adjust rotating speed, yoke speed and polishing duration, etc
Automatic slurry feeder with feeding speed control
High precision polishing controller to adjust pressure and flatness
Machine body utilized anti-corrosive materials
Power
208 - 240 VAC, 50 Hz, 450W
Polishing Plate
Size: 300 mm diameter
Speed: 1 - 240 rpm adjustable
Working station: 2
Sample holder diameter: 105 mm
Conditional ring diameter: 127.5 mm
High Precision Polishing Fixture (Optional)
Maximum sample diameter: 100 mm (4")
Maximum sample thickness: 12 mm
Sample holder travel distance: 12 mm Max. (verticle movement)
One digital micrometer is included with a resolution of +/- 1 micron for more accurate lapping
Please click the picture to the left for more details
Automatic Slurry Feeder
Volume of slurry up to 1.0 Gallon (~3.8L)
Can feed any abrasive or polishing slurry with particle size < 40 microns
Rotation speed: 8~20 RPM
Please click the picture to the left for more details
Can be upgraded to four channel automatic slurry feeder at an extra cost, please click the picture below for more details
Other Optional Accessories
Automatic mounting press for metallographic sample preparation (Click Pic 1 for details)
Six-slot sample loading plate is available at extra cost (Click Pic 2 for details)
Consumables for lapping/polishing, such as sandpaper discs (Pic 3), polishing pads (Pic 4), magnetic & buffer steel plates (Pic 5) and diamond polishing paste (Pic 6), can be ordered at MTI
1
2
3
4
5
6
Dimension
550 mm L × 700 mm W × 420 mm H without optional accessories
1,000 mm L ×700 mm W × 870 mm H with optional accessories
Net Weight
74 kg
Operation Instruction
Compliance
CE Certified
NRTL certification is NOT available temporarily
Warranty
One year limited warranty with lifetime support
Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Polishing machine applications
Application Notes
Add both the weight of the sample(s) and the sample loading plate when calculating total pressing force. For example, assume the sample weighs 0.1 kg. The included flat base sample loading plate weighs 2.5 kg. If a pressing force of 0.5 kgf is set on the machine, the total pressing force is 2.5 + 0.1 + 0.5 = 3.1 kgf
If the sample is small compared to the sample loading plate, please do the lapping/polishing with at least 3 similar samples, and mount the samples in a symmetrical, balanced pattern. This is crucial for the normal operation of the machine
Clean the machine including the polishing plate and the sample loading plate after each use. The machine must be disconnected from power supply before cleaning! DO NOT use cleaning agents or oil-based liquid! ONLY use water to wipe clean the machine. DO NOT flush the polishing plate sink! Limit the water level in the sink to no higher than 5 mm. Otherwise, the machine circuitry could be damaged by the overflowing water
The motor control circuit could be damaged by surge current. DO NOT start the rotary plates from a high rpm! Gradually increase the rotary speed to the desired value. Wait at least 10 sec between switching motor ON/OFF!
STANDARD PACKAGE
No.
Description
Qty
1
Unipol-1200S lapping/polishing machine
1 unit
2
Ø300 mm (12") stainless steel polishing plate
1 pc
3
Ø300 mm (12") iron polishing plate
1 pc
4
Alumina suspension polishing liquid
1 pc
5
Ø105 mm sample loading plate
1 pc
6
Ø127.5mm conditioning ring for restoring polishing plate flatness
1 pc
7
Rubber ring for the polishing plate sink
1 pc
8
Ø300 mm (12") Poromeric polishing pad
1 pc
9
$6,643.00
Original: $18,980.00
-65%
12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203—
$18,980.00
$6,643.00
More Images
12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203
Unipol-1203 is a 12" polisher designed for chemical mechanical polishing. The polishing parts are utilized anti-corrosive materials in order to avoid chemical corrosion. Two working stations are equipped along with an automatic slurry feeder and high precision polishing fixture to meet the processing requirements.
Fully automatic control panel to adjust rotating speed, yoke speed and polishing duration, etc
Automatic slurry feeder with feeding speed control
High precision polishing controller to adjust pressure and flatness
Machine body utilized anti-corrosive materials
Power
208 - 240 VAC, 50 Hz, 450W
Polishing Plate
Size: 300 mm diameter
Speed: 1 - 240 rpm adjustable
Working station: 2
Sample holder diameter: 105 mm
Conditional ring diameter: 127.5 mm
High Precision Polishing Fixture (Optional)
Maximum sample diameter: 100 mm (4")
Maximum sample thickness: 12 mm
Sample holder travel distance: 12 mm Max. (verticle movement)
One digital micrometer is included with a resolution of +/- 1 micron for more accurate lapping
Please click the picture to the left for more details
Automatic Slurry Feeder
Volume of slurry up to 1.0 Gallon (~3.8L)
Can feed any abrasive or polishing slurry with particle size < 40 microns
Rotation speed: 8~20 RPM
Please click the picture to the left for more details
Can be upgraded to four channel automatic slurry feeder at an extra cost, please click the picture below for more details
Other Optional Accessories
Automatic mounting press for metallographic sample preparation (Click Pic 1 for details)
Six-slot sample loading plate is available at extra cost (Click Pic 2 for details)
Consumables for lapping/polishing, such as sandpaper discs (Pic 3), polishing pads (Pic 4), magnetic & buffer steel plates (Pic 5) and diamond polishing paste (Pic 6), can be ordered at MTI
1
2
3
4
5
6
Dimension
550 mm L × 700 mm W × 420 mm H without optional accessories
1,000 mm L ×700 mm W × 870 mm H with optional accessories
Net Weight
74 kg
Operation Instruction
Compliance
CE Certified
NRTL certification is NOT available temporarily
Warranty
One year limited warranty with lifetime support
Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Polishing machine applications
Application Notes
Add both the weight of the sample(s) and the sample loading plate when calculating total pressing force. For example, assume the sample weighs 0.1 kg. The included flat base sample loading plate weighs 2.5 kg. If a pressing force of 0.5 kgf is set on the machine, the total pressing force is 2.5 + 0.1 + 0.5 = 3.1 kgf
If the sample is small compared to the sample loading plate, please do the lapping/polishing with at least 3 similar samples, and mount the samples in a symmetrical, balanced pattern. This is crucial for the normal operation of the machine
Clean the machine including the polishing plate and the sample loading plate after each use. The machine must be disconnected from power supply before cleaning! DO NOT use cleaning agents or oil-based liquid! ONLY use water to wipe clean the machine. DO NOT flush the polishing plate sink! Limit the water level in the sink to no higher than 5 mm. Otherwise, the machine circuitry could be damaged by the overflowing water
The motor control circuit could be damaged by surge current. DO NOT start the rotary plates from a high rpm! Gradually increase the rotary speed to the desired value. Wait at least 10 sec between switching motor ON/OFF!
STANDARD PACKAGE
No.
Description
Qty
1
Unipol-1200S lapping/polishing machine
1 unit
2
Ø300 mm (12") stainless steel polishing plate
1 pc
3
Ø300 mm (12") iron polishing plate
1 pc
4
Alumina suspension polishing liquid
1 pc
5
Ø105 mm sample loading plate
1 pc
6
Ø127.5mm conditioning ring for restoring polishing plate flatness
1 pc
7
Rubber ring for the polishing plate sink
1 pc
8
Ø300 mm (12") Poromeric polishing pad
1 pc
9
Product Information
Shipping & Returns
Description
Unipol-1203 is a 12" polisher designed for chemical mechanical polishing. The polishing parts are utilized anti-corrosive materials in order to avoid chemical corrosion. Two working stations are equipped along with an automatic slurry feeder and high precision polishing fixture to meet the processing requirements.
Fully automatic control panel to adjust rotating speed, yoke speed and polishing duration, etc
Automatic slurry feeder with feeding speed control
High precision polishing controller to adjust pressure and flatness
Machine body utilized anti-corrosive materials
Power
208 - 240 VAC, 50 Hz, 450W
Polishing Plate
Size: 300 mm diameter
Speed: 1 - 240 rpm adjustable
Working station: 2
Sample holder diameter: 105 mm
Conditional ring diameter: 127.5 mm
High Precision Polishing Fixture (Optional)
Maximum sample diameter: 100 mm (4")
Maximum sample thickness: 12 mm
Sample holder travel distance: 12 mm Max. (verticle movement)
One digital micrometer is included with a resolution of +/- 1 micron for more accurate lapping
Please click the picture to the left for more details
Automatic Slurry Feeder
Volume of slurry up to 1.0 Gallon (~3.8L)
Can feed any abrasive or polishing slurry with particle size < 40 microns
Rotation speed: 8~20 RPM
Please click the picture to the left for more details
Can be upgraded to four channel automatic slurry feeder at an extra cost, please click the picture below for more details
Other Optional Accessories
Automatic mounting press for metallographic sample preparation (Click Pic 1 for details)
Six-slot sample loading plate is available at extra cost (Click Pic 2 for details)
Consumables for lapping/polishing, such as sandpaper discs (Pic 3), polishing pads (Pic 4), magnetic & buffer steel plates (Pic 5) and diamond polishing paste (Pic 6), can be ordered at MTI
1
2
3
4
5
6
Dimension
550 mm L × 700 mm W × 420 mm H without optional accessories
1,000 mm L ×700 mm W × 870 mm H with optional accessories
Net Weight
74 kg
Operation Instruction
Compliance
CE Certified
NRTL certification is NOT available temporarily
Warranty
One year limited warranty with lifetime support
Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Polishing machine applications
Application Notes
Add both the weight of the sample(s) and the sample loading plate when calculating total pressing force. For example, assume the sample weighs 0.1 kg. The included flat base sample loading plate weighs 2.5 kg. If a pressing force of 0.5 kgf is set on the machine, the total pressing force is 2.5 + 0.1 + 0.5 = 3.1 kgf
If the sample is small compared to the sample loading plate, please do the lapping/polishing with at least 3 similar samples, and mount the samples in a symmetrical, balanced pattern. This is crucial for the normal operation of the machine
Clean the machine including the polishing plate and the sample loading plate after each use. The machine must be disconnected from power supply before cleaning! DO NOT use cleaning agents or oil-based liquid! ONLY use water to wipe clean the machine. DO NOT flush the polishing plate sink! Limit the water level in the sink to no higher than 5 mm. Otherwise, the machine circuitry could be damaged by the overflowing water
The motor control circuit could be damaged by surge current. DO NOT start the rotary plates from a high rpm! Gradually increase the rotary speed to the desired value. Wait at least 10 sec between switching motor ON/OFF!
STANDARD PACKAGE
No.
Description
Qty
1
Unipol-1200S lapping/polishing machine
1 unit
2
Ø300 mm (12") stainless steel polishing plate
1 pc
3
Ø300 mm (12") iron polishing plate
1 pc
4
Alumina suspension polishing liquid
1 pc
5
Ø105 mm sample loading plate
1 pc
6
Ø127.5mm conditioning ring for restoring polishing plate flatness
1 pc
7
Rubber ring for the polishing plate sink
1 pc
8
Ø300 mm (12") Poromeric polishing pad
1 pc
9
$6,643.00
Original: $18,980.00
-65%
12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203—
$18,980.00
$6,643.00
12" High Speed Automatic CMP Polisher w/ Auto Slurry Feeder- Unipol-1203 | MTI Online Store
You may also like
-65%NEW
Dual 8" Platens Grinder/ Polisher with Magnetic Plates & Complete Accessories - EQ-Unipol-820
$2,998.00
$1,049.30
-65%NEW
Mini (3") Automatic Grinder/ Polisher with Complete Accessories - Unipol300
$3,998.00
$1,399.30
-65%NEW
20" Precision Grinding and Polishing machine with Three Work Stations Up to 8" - UNIPOL- 2001
