🚚 Free Worldwide Shipping on All Orders!Shop Now
1200°C Tube Furnace w/ Hi-Vacuum (1E-4 torr) & 3 Channel Gas Flow Station for CVD - OTF-1200X-HVC3-series
HomeStore

1200°C Tube Furnace w/ Hi-Vacuum (1E-4 torr) & 3 Channel Gas Flow Station for CVD - OTF-1200X-HVC3-series

1200°C Tube Furnace w/ Hi-Vacuum (1E-4 torr) & 3 Channel Gas Flow Station for CVD - OTF-1200X-HVC3-series

The OTF-1200X-HVC series furnace workstation consists of an OTF-1200X series tube furnace, a precision mass flow gas control station, a high vacuum station, and other assembly parts. The max. working temperature of this workstation is 1200°C. The ultimate vacuum rate goes to 10^-4 torr (with our sealing assembly provided). The mass flow gas control station mixes three kinds of gas together and allows the mixed gas to flow into a fused quartz tube inside the furnace. It is competent for the experiments as CVD, Diffusion, and other thermo-treatments under a vacuum status and with a shielding gas protected.

SPECIFICATIONS:








OTF-1200X series tube furnace

 		Casing
  • Double-layer steel casing with air cooling.
  • Built-in thermostat to control Cooling running automatically when the case > 55°C.
Processing Tube Material: Fused quartz tube
One processing tube is included with the furnace.
Please contact MTI to specify the tube diameter. 
Please select the tube size in the optional bar to update the price.
Thermal block placement
Power 2.5KW
Rated Voltage AC 208-240V Single phase, 50/60Hz
Heating Element Fe-Cr-Al Alloy doped by Mo
Working Temp. Max. Heating Temp.: 1200°C
Continuous Working Temp.: 1100°C
Heat-up Rate Heat-up rate: 1~20°C/min programmable
Heating Zone Length Total heating zone: 440mm
Constant Temp. Zone: 150mm (±1°C)

Temp. Control
  • PID automatic control with 30 steps programmable segments.
  • Temperature accuracy: ±1°C
  • Thermocouple: K-type built inside the furnace

Vacuum Seal
  • One pair of stainless steel vacuum flange with:
    •  one mechanical pressure gauge
    •  two needle valves 
    • One KF-25 connector for the high vacuum station.
Power 100~110W
Rated Voltage AC 208-240V Single Phase, 50/60Hz

High Vacuum Station
Structure		 Mobile cart size: 600 (L) x 600 (W) x 700(H), mm
Max. Loading: 600 Lbs on top
Molecular pump control Panel: LCD digital
Inside: Pfeiffer vacuum pump made in Germany
Vacuum sensor is included

Volume Flow Rate		 Nitrogen N2 33 L/s
Helium He 39 L/s (2340L/minute)
Hydrogen H2 32 L/s
Working Range From 1000 mbar to <1E-7 mbar
Ultimate Pressure <1E-8 mbar (without any leaking )

Mass Flow Gas Control
GSL-LCD
 		Structure

 Made of a 316 stainless steel valve
Gas mixing tank: Φ80X120mm
600mm(L) x 745mm(W) x 700mm(H)
6" color touch screen control panel to make parameter setting at easy.
Touchscreen Control and PC remote switchable.
Power 23W per channel
Rated Voltage AC 220V/50Hz Single phase
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
Temperature controller (optional)
  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of Eurotherm 3004 temperature controller.
Optional
  • 2-9 Channel Gas Control System with PLC Touch Panel and PC Operation Software is available upon request at extra cost
  • Click the picture below - left to order bubbler or evaporator for CVD
       
Warning

Click here to learn the installation of a gas regulator
  • The tube furnaces with quartz tube are designed for use under vacuum and low pressure < 0.2 bars 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • The flow rate for gases should be limited to < 200 ml/min to reduce thermal shocks to the tube
  • Vacuum pressures may only be safely used up to 1000°C 
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at an extra cost.

 

$12,599.30

Original: $35,998.00

-65%
1200°C Tube Furnace w/ Hi-Vacuum (1E-4 torr) & 3 Channel Gas Flow Station for CVD - OTF-1200X-HVC3-series—

$35,998.00

$12,599.30

1200°C Tube Furnace w/ Hi-Vacuum (1E-4 torr) & 3 Channel Gas Flow Station for CVD - OTF-1200X-HVC3-series

The OTF-1200X-HVC series furnace workstation consists of an OTF-1200X series tube furnace, a precision mass flow gas control station, a high vacuum station, and other assembly parts. The max. working temperature of this workstation is 1200°C. The ultimate vacuum rate goes to 10^-4 torr (with our sealing assembly provided). The mass flow gas control station mixes three kinds of gas together and allows the mixed gas to flow into a fused quartz tube inside the furnace. It is competent for the experiments as CVD, Diffusion, and other thermo-treatments under a vacuum status and with a shielding gas protected.

SPECIFICATIONS:








OTF-1200X series tube furnace

 		Casing
  • Double-layer steel casing with air cooling.
  • Built-in thermostat to control Cooling running automatically when the case > 55°C.
Processing Tube Material: Fused quartz tube
One processing tube is included with the furnace.
Please contact MTI to specify the tube diameter. 
Please select the tube size in the optional bar to update the price.
Thermal block placement
Power 2.5KW
Rated Voltage AC 208-240V Single phase, 50/60Hz
Heating Element Fe-Cr-Al Alloy doped by Mo
Working Temp. Max. Heating Temp.: 1200°C
Continuous Working Temp.: 1100°C
Heat-up Rate Heat-up rate: 1~20°C/min programmable
Heating Zone Length Total heating zone: 440mm
Constant Temp. Zone: 150mm (±1°C)

Temp. Control
  • PID automatic control with 30 steps programmable segments.
  • Temperature accuracy: ±1°C
  • Thermocouple: K-type built inside the furnace

Vacuum Seal
  • One pair of stainless steel vacuum flange with:
    •  one mechanical pressure gauge
    •  two needle valves 
    • One KF-25 connector for the high vacuum station.
Power 100~110W
Rated Voltage AC 208-240V Single Phase, 50/60Hz

High Vacuum Station
Structure		 Mobile cart size: 600 (L) x 600 (W) x 700(H), mm
Max. Loading: 600 Lbs on top
Molecular pump control Panel: LCD digital
Inside: Pfeiffer vacuum pump made in Germany
Vacuum sensor is included

Volume Flow Rate		 Nitrogen N2 33 L/s
Helium He 39 L/s (2340L/minute)
Hydrogen H2 32 L/s
Working Range From 1000 mbar to <1E-7 mbar
Ultimate Pressure <1E-8 mbar (without any leaking )

Mass Flow Gas Control
GSL-LCD
 		Structure

 Made of a 316 stainless steel valve
Gas mixing tank: Φ80X120mm
600mm(L) x 745mm(W) x 700mm(H)
6" color touch screen control panel to make parameter setting at easy.
Touchscreen Control and PC remote switchable.
Power 23W per channel
Rated Voltage AC 220V/50Hz Single phase
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
Temperature controller (optional)
  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of Eurotherm 3004 temperature controller.
Optional
  • 2-9 Channel Gas Control System with PLC Touch Panel and PC Operation Software is available upon request at extra cost
  • Click the picture below - left to order bubbler or evaporator for CVD
       
Warning

Click here to learn the installation of a gas regulator
  • The tube furnaces with quartz tube are designed for use under vacuum and low pressure < 0.2 bars 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • The flow rate for gases should be limited to < 200 ml/min to reduce thermal shocks to the tube
  • Vacuum pressures may only be safely used up to 1000°C 
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at an extra cost.

 

Product Information

Shipping & Returns

Description

The OTF-1200X-HVC series furnace workstation consists of an OTF-1200X series tube furnace, a precision mass flow gas control station, a high vacuum station, and other assembly parts. The max. working temperature of this workstation is 1200°C. The ultimate vacuum rate goes to 10^-4 torr (with our sealing assembly provided). The mass flow gas control station mixes three kinds of gas together and allows the mixed gas to flow into a fused quartz tube inside the furnace. It is competent for the experiments as CVD, Diffusion, and other thermo-treatments under a vacuum status and with a shielding gas protected.

SPECIFICATIONS:








OTF-1200X series tube furnace

 		Casing
  • Double-layer steel casing with air cooling.
  • Built-in thermostat to control Cooling running automatically when the case > 55°C.
Processing Tube Material: Fused quartz tube
One processing tube is included with the furnace.
Please contact MTI to specify the tube diameter. 
Please select the tube size in the optional bar to update the price.
Thermal block placement
Power 2.5KW
Rated Voltage AC 208-240V Single phase, 50/60Hz
Heating Element Fe-Cr-Al Alloy doped by Mo
Working Temp. Max. Heating Temp.: 1200°C
Continuous Working Temp.: 1100°C
Heat-up Rate Heat-up rate: 1~20°C/min programmable
Heating Zone Length Total heating zone: 440mm
Constant Temp. Zone: 150mm (±1°C)

Temp. Control
  • PID automatic control with 30 steps programmable segments.
  • Temperature accuracy: ±1°C
  • Thermocouple: K-type built inside the furnace

Vacuum Seal
  • One pair of stainless steel vacuum flange with:
    •  one mechanical pressure gauge
    •  two needle valves 
    • One KF-25 connector for the high vacuum station.
Power 100~110W
Rated Voltage AC 208-240V Single Phase, 50/60Hz

High Vacuum Station
Structure		 Mobile cart size: 600 (L) x 600 (W) x 700(H), mm
Max. Loading: 600 Lbs on top
Molecular pump control Panel: LCD digital
Inside: Pfeiffer vacuum pump made in Germany
Vacuum sensor is included

Volume Flow Rate		 Nitrogen N2 33 L/s
Helium He 39 L/s (2340L/minute)
Hydrogen H2 32 L/s
Working Range From 1000 mbar to <1E-7 mbar
Ultimate Pressure <1E-8 mbar (without any leaking )

Mass Flow Gas Control
GSL-LCD
 		Structure

 Made of a 316 stainless steel valve
Gas mixing tank: Φ80X120mm
600mm(L) x 745mm(W) x 700mm(H)
6" color touch screen control panel to make parameter setting at easy.
Touchscreen Control and PC remote switchable.
Power 23W per channel
Rated Voltage AC 220V/50Hz Single phase
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
Temperature controller (optional)
  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of Eurotherm 3004 temperature controller.
Optional
  • 2-9 Channel Gas Control System with PLC Touch Panel and PC Operation Software is available upon request at extra cost
  • Click the picture below - left to order bubbler or evaporator for CVD
       
Warning

Click here to learn the installation of a gas regulator
  • The tube furnaces with quartz tube are designed for use under vacuum and low pressure < 0.2 bars 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • The flow rate for gases should be limited to < 200 ml/min to reduce thermal shocks to the tube
  • Vacuum pressures may only be safely used up to 1000°C 
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at an extra cost.

 

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

Compact 2 Channel MFC Gas Delivery System with PLC Touch Panel Control- GSL-2Z-LCD-S

$7,998.00

$2,799.30

-65%NEW
Thumbnail 1

2 Channel ALD Control Unit with 4 Channel MFC Gas Delivery System - GSLALD4

$49,998.00

$17,499.30

-65%NEW
Thumbnail 1

2-9 Channel Gas Control System with PLC Touch Panel and PC Operation Software - GSL-LCD

$7,995.00

$2,798.25

-65%NEW
Thumbnail 1

1200°C Three Zones Tube Furnace with High Vacuum Station (1.0E-4 torr) + 4 Channel MFC Gas Station for CVD - OTF-1200X-III-HVC-LD

$46,998.00

$16,449.30

NEW
Thumbnail 1

Three Zones Tube Furnace (4") with Vacuum Pump (1.0E-4 torr) + 9 Channel Digital Gas Flow-meters for CVD - OTF-1200X-4-III-9HV

$119,985.00

NEW
Thumbnail 1

Single Zone Tube Furnace (80 mm Dia, 1200C Max) with 3 Channel Gas Mixer, Vacuum Pump, and Anti-Corrosive Vacuum Gauge - OTF-1200X-80-F3LV

$14,985.00

NEW
Thumbnail 1

1200°C Max. Compact Auto-Sliding PECVD Furnace w/ 2" Tube and Vacuum Pump, - OTF-1200X-S50-PESL

$46,989.00

-65%NEW
Thumbnail 1Thumbnail 2

Gas Mixing Station with Three Channel Float Flowmeters and Valves - GSL-3F-SS

$2,998.00

$1,049.30

NEW
Thumbnail 1

1700C Single Zone Alumina Tube Furnace with 3 Channel Gas Mixer, Vacuum Station, and Anti-Corrosive Vacuum Gauge - GSL-1700X-F3LV

$19,998.00

NEW
Thumbnail 1Thumbnail 2

Three Zones CVD Tube Furnace with 8.5" Quartz Tube & Slidable Flange (1100C) - GSL-1100X-8.5-III-SR

$64,998.00

NEW
Thumbnail 1

3 Zone Furnace (5" Dia, 1200C Max) w/ Sliding Flange, Gas Mixer & Vacuum Pump - OTF-1200X-III-5-C3LVSF

$39,985.00