🚚 Free Worldwide Shipping on All Orders!Shop Now
200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300
HomeStore

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power
  • 208-240 VAC, 50/60 Hz, single phase, 20 A
  • 4.5 kVA
Roller Material & Size
  • High strength refractory steel with hardness RC > 58 
  • Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W)
  • Suggested rolling width: 150 mm
  • Roll line speed: 0~ 50 mm/s adjustable
  • Max. the temperature for the roller: 200°C
  • Driving by DC motor
  • Ar gas glove box compatible 

Roller Gap ( Thickness )
  • 0~ 1.8 mm adjustable

Dial Gauge Accuracy
(Thickness Indicating )
  • Dual digital micrometer heads
  • Accuracy: +/- 0.005mm


Movable Hot Plate
  • The hot plate is made of High strength refractory steel with hardness RC > 58 
  • Dimension: 200 mm W x 300 mm L
  • The hot plate is movable by the hot roller via friction
  • Max. working temperature: 300°C
  • Water chiller is required but not included if the working temperature is > 100°C
  • Max. Rolling width on the plate: 150mm
Heating Temperature
  • Two digital temperature controllers for control hot roller and hot plate separately
  • 200°C suggested, and 300°C maximum
  • Max Heating Rate: 4°C/minute
  • Temperature Control Accuracy: +/-3°C

Motor (Ar Gas Glove Box Compatible)
  • High torque 24VDC motor with reducing gear (1:75) 
  • Motor power: 40W
  • Rolling speed adjustable: 5~45 r/min

Output Thickness
  • Depending on the electrode's material and thickness, typically:
    • A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
    • A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
    • A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
  • Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at extra cost
Warnings
  • Do not touch the surface of the rolling part of the machine when the rollers are heated up or running
  • You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
  • Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness

 

$10,499.30

Original: $29,998.00

-65%
200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300—

$29,998.00

$10,499.30

More Images

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300 - Image 2

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power
  • 208-240 VAC, 50/60 Hz, single phase, 20 A
  • 4.5 kVA
Roller Material & Size
  • High strength refractory steel with hardness RC > 58 
  • Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W)
  • Suggested rolling width: 150 mm
  • Roll line speed: 0~ 50 mm/s adjustable
  • Max. the temperature for the roller: 200°C
  • Driving by DC motor
  • Ar gas glove box compatible 

Roller Gap ( Thickness )
  • 0~ 1.8 mm adjustable

Dial Gauge Accuracy
(Thickness Indicating )
  • Dual digital micrometer heads
  • Accuracy: +/- 0.005mm


Movable Hot Plate
  • The hot plate is made of High strength refractory steel with hardness RC > 58 
  • Dimension: 200 mm W x 300 mm L
  • The hot plate is movable by the hot roller via friction
  • Max. working temperature: 300°C
  • Water chiller is required but not included if the working temperature is > 100°C
  • Max. Rolling width on the plate: 150mm
Heating Temperature
  • Two digital temperature controllers for control hot roller and hot plate separately
  • 200°C suggested, and 300°C maximum
  • Max Heating Rate: 4°C/minute
  • Temperature Control Accuracy: +/-3°C

Motor (Ar Gas Glove Box Compatible)
  • High torque 24VDC motor with reducing gear (1:75) 
  • Motor power: 40W
  • Rolling speed adjustable: 5~45 r/min

Output Thickness
  • Depending on the electrode's material and thickness, typically:
    • A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
    • A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
    • A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
  • Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at extra cost
Warnings
  • Do not touch the surface of the rolling part of the machine when the rollers are heated up or running
  • You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
  • Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness

 

Product Information

Shipping & Returns

Description

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power
  • 208-240 VAC, 50/60 Hz, single phase, 20 A
  • 4.5 kVA
Roller Material & Size
  • High strength refractory steel with hardness RC > 58 
  • Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W)
  • Suggested rolling width: 150 mm
  • Roll line speed: 0~ 50 mm/s adjustable
  • Max. the temperature for the roller: 200°C
  • Driving by DC motor
  • Ar gas glove box compatible 

Roller Gap ( Thickness )
  • 0~ 1.8 mm adjustable

Dial Gauge Accuracy
(Thickness Indicating )
  • Dual digital micrometer heads
  • Accuracy: +/- 0.005mm


Movable Hot Plate
  • The hot plate is made of High strength refractory steel with hardness RC > 58 
  • Dimension: 200 mm W x 300 mm L
  • The hot plate is movable by the hot roller via friction
  • Max. working temperature: 300°C
  • Water chiller is required but not included if the working temperature is > 100°C
  • Max. Rolling width on the plate: 150mm
Heating Temperature
  • Two digital temperature controllers for control hot roller and hot plate separately
  • 200°C suggested, and 300°C maximum
  • Max Heating Rate: 4°C/minute
  • Temperature Control Accuracy: +/-3°C

Motor (Ar Gas Glove Box Compatible)
  • High torque 24VDC motor with reducing gear (1:75) 
  • Motor power: 40W
  • Rolling speed adjustable: 5~45 r/min

Output Thickness
  • Depending on the electrode's material and thickness, typically:
    • A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
    • A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
    • A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
  • Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance
  • CE Certified
  • NRTL or CSA certification is available upon request at extra cost
Warnings
  • Do not touch the surface of the rolling part of the machine when the rollers are heated up or running
  • You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
  • Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness

 

You may also like

NEW
Thumbnail 1Thumbnail 2

Magnetic De-ironing Filtration System (5L) for Battery Electrode Slurry - MSK-FT02

$10,585.00

-65%NEW
Thumbnail 1Thumbnail 2

Compact Tape Casting Coater w/ Vac. Chuck (200Wx365L mm) & Film Applicator & Optional Heater - MSK-AFA-III

$3,998.00

$1,399.30

-65%NEW
Thumbnail 1Thumbnail 2

Roll to Roll Edge Slitting Machine (Max.300mm W) for Single Strip of Cylindrical/Pouch Battery - MSK-540

$45,865.00

$16,052.75

-65%NEW
Thumbnail 1Thumbnail 2

Automatic Precision Electrolyte Injection Station for Micro/Pouch/Cylinder Batteries - MSK-113-A

$39,998.00

$13,999.30

-65%NEW
Thumbnail 1Thumbnail 2

Compact Vacuum Electrolyte Injection System for Pouch and Cylinder Cells - MSK-113-CP

$28,985.00

$10,144.75

-65%NEW
Thumbnail 1

Automatic Digital Bottletop Dispenser with 32oz Glass Bottle for 0 - 50 mL Electrolyte Liquid - BD50ML

$1,389.00

$486.15

-65%NEW
Thumbnail 1Thumbnail 2

Compact Roll to Roll Coater w/ 160mm Max. Width & 6 Optional Coating Heads (Combination)-MSK-AFA-200

$49,980.00

$17,493.00

-65%NEW
Thumbnail 1Thumbnail 2

5 Channel Automatic Battery Sorter/ Battery Selector for 18650, 26650 or 21700 Cell - MSK-BS-LD

$19,998.00

$6,999.30

-65%NEW
Thumbnail 1Thumbnail 2

Compact Disassembling Machine for 18650, 21700, 26650 and 4680 -46110 Cylindrical Cases - MSK-4680

$5,498.00

$1,924.30

-65%NEW
Thumbnail 1Thumbnail 2

Desk-top Semi-Auto Grooving Machine for Various Cylinder Cell - MSK-500 Series

$6,996.00

$2,448.60

-65%NEW
Thumbnail 1Thumbnail 2

Hydraulic Crimping Machine for Cylindrical Cases (Optional: 32650, 26650, 21700, 18650, etc) - MSK-510M series

$3,698.00

$1,294.30

-65%NEW
Thumbnail 1Thumbnail 2

Hydraulic Disassembling Machine for CR20XX Button Cell - MSK-110D

$2,498.00

$874.30