🚚 Free Worldwide Shipping on All Orders!Shop Now
25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A
HomeStore

25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A

25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A

MSK--E2300A is a precision electric calendar machine (rolling press) with a high-quality hydraulic pressure-controllable system. It can prepare electrode sheets (current collector with the material coated on it) at consistent and repeatable rolling pressure up to 20T.
MTI has granted the patents 201720537817.1& 201720534495.5 for the Pressure Controlled Electric Rolling Machine MSK-E2300A since December 2017.

SPECIFICATIONS:


Working Voltage
  • 208 - 240 VAC, 50/60Hz, Single Phase
  • 220V AC Power plug is not included (Please click here to order the plug)

Max. Power Consumption
  • 1.5KW

Rollers (One pair)
  • Dimensions: 200mm (Dia.) x 330mm (W)
  • Material: HRC 60 - 62
  • Effective Rolling Width: <250mm
  • Ra: 0.8 ~ 1.25um
             
Press Gap
  • Max. 1.5 mm adjustable by two-micrometer knobs
  • Tolerance: 0.003mm
Motor & Rolling Speed
  • 550W AC motor with frequency speed controller
  • Speed range: 1.0 - 3.0 meters / Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness
  • 60 - 62 HRC
  • Never roll materials with HRC >50

Press Planeness
  • ± 0.003mm

Pressure Control
  • Pressure load: Max. 25T adjustable by touchscreen control
  • The Digital pressure display shows the set and real pressure force applied to the material

             

Compressed Air
  • >60 PSI required (Air compressor is not included; you may order one in the related product)
  • Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator

      pic1         pic2
Optional 
Dimension
  • L1217 mm * W618 mm * H935 mm
Weight
  • ~ 750 kg

Compliance
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost

Application Notes
  • To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
  • Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
  • Never roll materials with hardness > HRC 50
  • In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
  • Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet's original thickness
  • Clean roller surface after each rolling and apply lubricant when not in use to avoid corrosion

 

$55,890.00
25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A—
$55,890.00

25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A

MSK--E2300A is a precision electric calendar machine (rolling press) with a high-quality hydraulic pressure-controllable system. It can prepare electrode sheets (current collector with the material coated on it) at consistent and repeatable rolling pressure up to 20T.
MTI has granted the patents 201720537817.1& 201720534495.5 for the Pressure Controlled Electric Rolling Machine MSK-E2300A since December 2017.

SPECIFICATIONS:


Working Voltage
  • 208 - 240 VAC, 50/60Hz, Single Phase
  • 220V AC Power plug is not included (Please click here to order the plug)

Max. Power Consumption
  • 1.5KW

Rollers (One pair)
  • Dimensions: 200mm (Dia.) x 330mm (W)
  • Material: HRC 60 - 62
  • Effective Rolling Width: <250mm
  • Ra: 0.8 ~ 1.25um
             
Press Gap
  • Max. 1.5 mm adjustable by two-micrometer knobs
  • Tolerance: 0.003mm
Motor & Rolling Speed
  • 550W AC motor with frequency speed controller
  • Speed range: 1.0 - 3.0 meters / Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness
  • 60 - 62 HRC
  • Never roll materials with HRC >50

Press Planeness
  • ± 0.003mm

Pressure Control
  • Pressure load: Max. 25T adjustable by touchscreen control
  • The Digital pressure display shows the set and real pressure force applied to the material

             

Compressed Air
  • >60 PSI required (Air compressor is not included; you may order one in the related product)
  • Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator

      pic1         pic2
Optional 
Dimension
  • L1217 mm * W618 mm * H935 mm
Weight
  • ~ 750 kg

Compliance
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost

Application Notes
  • To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
  • Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
  • Never roll materials with hardness > HRC 50
  • In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
  • Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet's original thickness
  • Clean roller surface after each rolling and apply lubricant when not in use to avoid corrosion

 

Product Information

Shipping & Returns

Description

MSK--E2300A is a precision electric calendar machine (rolling press) with a high-quality hydraulic pressure-controllable system. It can prepare electrode sheets (current collector with the material coated on it) at consistent and repeatable rolling pressure up to 20T.
MTI has granted the patents 201720537817.1& 201720534495.5 for the Pressure Controlled Electric Rolling Machine MSK-E2300A since December 2017.

SPECIFICATIONS:


Working Voltage
  • 208 - 240 VAC, 50/60Hz, Single Phase
  • 220V AC Power plug is not included (Please click here to order the plug)

Max. Power Consumption
  • 1.5KW

Rollers (One pair)
  • Dimensions: 200mm (Dia.) x 330mm (W)
  • Material: HRC 60 - 62
  • Effective Rolling Width: <250mm
  • Ra: 0.8 ~ 1.25um
             
Press Gap
  • Max. 1.5 mm adjustable by two-micrometer knobs
  • Tolerance: 0.003mm
Motor & Rolling Speed
  • 550W AC motor with frequency speed controller
  • Speed range: 1.0 - 3.0 meters / Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness
  • 60 - 62 HRC
  • Never roll materials with HRC >50

Press Planeness
  • ± 0.003mm

Pressure Control
  • Pressure load: Max. 25T adjustable by touchscreen control
  • The Digital pressure display shows the set and real pressure force applied to the material

             

Compressed Air
  • >60 PSI required (Air compressor is not included; you may order one in the related product)
  • Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator

      pic1         pic2
Optional 
Dimension
  • L1217 mm * W618 mm * H935 mm
Weight
  • ~ 750 kg

Compliance
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost

Application Notes
  • To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
  • Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
  • Never roll materials with hardness > HRC 50
  • In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
  • Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet's original thickness
  • Clean roller surface after each rolling and apply lubricant when not in use to avoid corrosion

 

25T Max. Pressure Controlled Rolling Machine (12" W x 8"Dia.) for Battery Electrodes-MSK-E2300A | MTI Online Store