🚚 Free Worldwide Shipping on All Orders!Shop Now

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250

MSK-AFA-II-HDS250 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 550mm L x 200 - 250 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskite solar cells, fuel cell proton exchange membrane, and the battery electrode.

SPECIFICATIONS

Working Power	110 V or 208 - 240V AC selectable 50/60Hz 2000W
Film coater	Vacuum chuck made of Aluminum alloy with < 1.0 mm hole Vacuum Chuck Dimensions: 609 mm (L) x 300mm (W) (24“L x 12" W) The chuck is heated up to 120°C by a digital temperature controller with +/- 1ºC accuracy One vacuum pump is required, but not included, please order separately. (optional) Moving Speed: One pushing bar is included for moving film applicator at speed of 5 - 100 mm/sec variable Moving Length: 10 - 550 mm adjustable by Adjustable Position Switch
Hybrid Coating Head	Film coating head consists of one fixed PTFE 250 mm width doctor blade and one 200 mm width removable slot die head ( click Pic. 1 below to see detail). The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2) Doctor blade: 250 mm width for minimum thickness of 0.010 mm film Slot die: 200 mm width for minimum thickness of 0.005 mm film Click the picture below right to order a spare slot die head with various width. Pic. 1 Pic. 2
Digital Syringe Pump	Digital syringe pump with a easy to use control panel screen is included for slot-die coating Holds small or big syringes up to 200 mL and remembers previous settings on power-up Pumping rate: 1.963μL/min with a 10 μL syringe and 294.524mL/min with a 200mL syringe The movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min) Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation
Options	In order to achieve better coating by the slot die, slurry's Viscosity and dispersion is very important. Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 2) and find the best parameter for your coating Pic. 1
Compliance	CE certified NRTL or CSA certification is available upon request at the extra cost

$6,999.30

Original: $19,998.00

-65%

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250—

$19,998.00

$6,999.30

More Images

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250 - Image 2

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250

MSK-AFA-II-HDS250 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 550mm L x 200 - 250 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskite solar cells, fuel cell proton exchange membrane, and the battery electrode.

SPECIFICATIONS

Working Power	110 V or 208 - 240V AC selectable 50/60Hz 2000W
Film coater	Vacuum chuck made of Aluminum alloy with < 1.0 mm hole Vacuum Chuck Dimensions: 609 mm (L) x 300mm (W) (24“L x 12" W) The chuck is heated up to 120°C by a digital temperature controller with +/- 1ºC accuracy One vacuum pump is required, but not included, please order separately. (optional) Moving Speed: One pushing bar is included for moving film applicator at speed of 5 - 100 mm/sec variable Moving Length: 10 - 550 mm adjustable by Adjustable Position Switch
Hybrid Coating Head	Film coating head consists of one fixed PTFE 250 mm width doctor blade and one 200 mm width removable slot die head ( click Pic. 1 below to see detail). The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2) Doctor blade: 250 mm width for minimum thickness of 0.010 mm film Slot die: 200 mm width for minimum thickness of 0.005 mm film Click the picture below right to order a spare slot die head with various width. Pic. 1 Pic. 2
Digital Syringe Pump	Digital syringe pump with a easy to use control panel screen is included for slot-die coating Holds small or big syringes up to 200 mL and remembers previous settings on power-up Pumping rate: 1.963μL/min with a 10 μL syringe and 294.524mL/min with a 200mL syringe The movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min) Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation
Options	In order to achieve better coating by the slot die, slurry's Viscosity and dispersion is very important. Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 2) and find the best parameter for your coating Pic. 1
Compliance	CE certified NRTL or CSA certification is available upon request at the extra cost

Product Information

Shipping & Returns

Description

MSK-AFA-II-HDS250 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 550mm L x 200 - 250 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskite solar cells, fuel cell proton exchange membrane, and the battery electrode.

SPECIFICATIONS

Working Power	110 V or 208 - 240V AC selectable 50/60Hz 2000W
Film coater	Vacuum chuck made of Aluminum alloy with < 1.0 mm hole Vacuum Chuck Dimensions: 609 mm (L) x 300mm (W) (24“L x 12" W) The chuck is heated up to 120°C by a digital temperature controller with +/- 1ºC accuracy One vacuum pump is required, but not included, please order separately. (optional) Moving Speed: One pushing bar is included for moving film applicator at speed of 5 - 100 mm/sec variable Moving Length: 10 - 550 mm adjustable by Adjustable Position Switch
Hybrid Coating Head	Film coating head consists of one fixed PTFE 250 mm width doctor blade and one 200 mm width removable slot die head ( click Pic. 1 below to see detail). The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2) Doctor blade: 250 mm width for minimum thickness of 0.010 mm film Slot die: 200 mm width for minimum thickness of 0.005 mm film Click the picture below right to order a spare slot die head with various width. Pic. 1 Pic. 2
Digital Syringe Pump	Digital syringe pump with a easy to use control panel screen is included for slot-die coating Holds small or big syringes up to 200 mL and remembers previous settings on power-up Pumping rate: 1.963μL/min with a 10 μL syringe and 294.524mL/min with a 200mL syringe The movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min) Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation
Options	In order to achieve better coating by the slot die, slurry's Viscosity and dispersion is very important. Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 2) and find the best parameter for your coating Pic. 1
Compliance	CE certified NRTL or CSA certification is available upon request at the extra cost

Hybrid Film Coater w/ Both Slot Die (W200mm) & Doctor Blade (W250 mm) - MSK-AFA-II-HDS250 | MTI Online Store