🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore
Hard Carbon Single-Side Coated Al Foil for Sodium Ion Battery Anode (241 L x 200 W x 0.09 Thickness mm) 5 sheets/bag - bcaf-BHCss
Hard Carbon Single-Side Coated Al Foil for Sodium Ion Battery Anode (241 L x 200 W x 0.09 Thickness mm) 5 sheets/bag - bcaf-BHCss
This electrode sheet is based on aluminum foil coated with hard carbon on a single side and is used as anodes in Na-Ion battery.
There are 5 sheets in a package bag.
There are 5 sheets in a package bag.
SPECIFICATIONS:
- Total Area: 241 mm L x 200 mm W x 110 um T
- Coating Area: 241 mm L x 175 mm W (Left and Right-hand side 12.5 mm without coating)
- Single side coating
- Current collector (substrate): Aluminum foil, 16 um thickness
- Coating area density: 6.3 ± 0.2 mg/cm2
- Compaction density: 0.9 g/cm3
- Coating thickness: ~70 um
- Active Material Proportion: 92% [2% SuperP carbon, 6% PVDF in NMP)
- Specific Capacity: 280±30mAh/g (Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1, please order it from here LBE-EDE111)
-
- Qty: 5 sheets / bag
- Warning: Please dry in vacuum oven before using and store it inside glovebox after opening the package
-
SDS for Aluminum Foil. SDS for Hard Carbon - Application Note:
- Please baking at 120oC under a vacuum oven before coating.
- MTI does not manufacture this product. We only provide a small quantity to research to develop a new generation battery,
- MTI is not responsible for any IP issues. If anyone feels the product conflict with your IP, please inform us, we may stop selling at any time.
 Battery Powders |
 Electrode Coating |
 Coin Cell Assembling |
 Pouch Cell Assembling |
 Cylinder Cell Assembling |
 Electrolyte injection |
 New innovation in MTI |
$298.60
Hard Carbon Single-Side Coated Al Foil for Sodium Ion Battery Anode (241 L x 200 W x 0.09 Thickness mm) 5 sheets/bag - bcaf-BHCss—
$298.60
Hard Carbon Single-Side Coated Al Foil for Sodium Ion Battery Anode (241 L x 200 W x 0.09 Thickness mm) 5 sheets/bag - bcaf-BHCss
This electrode sheet is based on aluminum foil coated with hard carbon on a single side and is used as anodes in Na-Ion battery.
There are 5 sheets in a package bag.
There are 5 sheets in a package bag.
SPECIFICATIONS:
- Total Area: 241 mm L x 200 mm W x 110 um T
- Coating Area: 241 mm L x 175 mm W (Left and Right-hand side 12.5 mm without coating)
- Single side coating
- Current collector (substrate): Aluminum foil, 16 um thickness
- Coating area density: 6.3 ± 0.2 mg/cm2
- Compaction density: 0.9 g/cm3
- Coating thickness: ~70 um
- Active Material Proportion: 92% [2% SuperP carbon, 6% PVDF in NMP)
- Specific Capacity: 280±30mAh/g (Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1, please order it from here LBE-EDE111)
-
- Qty: 5 sheets / bag
- Warning: Please dry in vacuum oven before using and store it inside glovebox after opening the package
-
SDS for Aluminum Foil. SDS for Hard Carbon
- Application Note:
- Please baking at 120oC under a vacuum oven before coating.
- MTI does not manufacture this product. We only provide a small quantity to research to develop a new generation battery,
- MTI is not responsible for any IP issues. If anyone feels the product conflict with your IP, please inform us, we may stop selling at any time.
|
Battery Powders |
Electrode Coating |
Coin Cell Assembling |
Pouch Cell Assembling |
Cylinder Cell Assembling |
Electrolyte injection |
New innovation in MTI |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This electrode sheet is based on aluminum foil coated with hard carbon on a single side and is used as anodes in Na-Ion battery.
There are 5 sheets in a package bag.
There are 5 sheets in a package bag.
SPECIFICATIONS:
- Total Area: 241 mm L x 200 mm W x 110 um T
- Coating Area: 241 mm L x 175 mm W (Left and Right-hand side 12.5 mm without coating)
- Single side coating
- Current collector (substrate): Aluminum foil, 16 um thickness
- Coating area density: 6.3 ± 0.2 mg/cm2
- Compaction density: 0.9 g/cm3
- Coating thickness: ~70 um
- Active Material Proportion: 92% [2% SuperP carbon, 6% PVDF in NMP)
- Specific Capacity: 280±30mAh/g (Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1, please order it from here LBE-EDE111)
-
- Qty: 5 sheets / bag
- Warning: Please dry in vacuum oven before using and store it inside glovebox after opening the package
-
SDS for Aluminum Foil. SDS for Hard Carbon
- Application Note:
- Please baking at 120oC under a vacuum oven before coating.
- MTI does not manufacture this product. We only provide a small quantity to research to develop a new generation battery,
- MTI is not responsible for any IP issues. If anyone feels the product conflict with your IP, please inform us, we may stop selling at any time.
|
Battery Powders |
Electrode Coating |
Coin Cell Assembling |
Pouch Cell Assembling |
Cylinder Cell Assembling |
Electrolyte injection |
New innovation in MTI |
