🚚 Free Worldwide Shipping on All Orders!Shop Now

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

MSK-ESPS-60-24V is an AC input DC output high voltage power supply designed for the DIY Electrospinning device.

High voltage power in the system must have Grounding tests(GFCI) before first-time use. Improper grounding may cause charge build-up and damage the unit.

SPECIFICATIONS

Features	Digital Voltmeter and Current display Output voltage and current can be set by using knobs on the front panel and read from the digital display Constant current/Constant Voltage mode of operation Built-in Arc Protection Circuit
Input Power	208 - 240V AC (50/60Hz) 150W Max power consumption You may order a 200W transformer to run it at 110VAC Power Inlet and Outlet Cable are included
Output Power	DC 0 - 60 kV Single Output, 2.5 mA max Current
Dimensions	214mmL×285mmW×67mmH
Operational Environment	Temperature: 0 - 50 °C Humidity: 10 - 80% RH
Compliance	NRTL certification is available upon request at the extra cost
Warranty	One-year limited warranty with lifetime support
Options	You may need Syringe Pump to deliver liquid, Please click the Pic. 1 below to order. You may need a drum collector to make coating ( Please click Pic. 2 to order) You may order X-Y stage for flat coating, please click Pic. 3 right to order Please put the device into a fume hood for safety and health ( Pic. 4) DIY an Ultrasonic Spray and Electrospinning device Pic. 1 Pic. 2 Pic. 3 Pic. 4
Operation Instructions

$8,998.00

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV—

$8,998.00

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

MSK-ESPS-60-24V is an AC input DC output high voltage power supply designed for the DIY Electrospinning device.

High voltage power in the system must have Grounding tests(GFCI) before first-time use. Improper grounding may cause charge build-up and damage the unit.

SPECIFICATIONS

Features	Digital Voltmeter and Current display Output voltage and current can be set by using knobs on the front panel and read from the digital display Constant current/Constant Voltage mode of operation Built-in Arc Protection Circuit
Input Power	208 - 240V AC (50/60Hz) 150W Max power consumption You may order a 200W transformer to run it at 110VAC Power Inlet and Outlet Cable are included
Output Power	DC 0 - 60 kV Single Output, 2.5 mA max Current
Dimensions	214mmL×285mmW×67mmH
Operational Environment	Temperature: 0 - 50 °C Humidity: 10 - 80% RH
Compliance	NRTL certification is available upon request at the extra cost
Warranty	One-year limited warranty with lifetime support
Options	You may need Syringe Pump to deliver liquid, Please click the Pic. 1 below to order. You may need a drum collector to make coating ( Please click Pic. 2 to order) You may order X-Y stage for flat coating, please click Pic. 3 right to order Please put the device into a fume hood for safety and health ( Pic. 4) DIY an Ultrasonic Spray and Electrospinning device Pic. 1 Pic. 2 Pic. 3 Pic. 4
Operation Instructions

Product Information

Shipping & Returns

Description

MSK-ESPS-60-24V is an AC input DC output high voltage power supply designed for the DIY Electrospinning device.

High voltage power in the system must have Grounding tests(GFCI) before first-time use. Improper grounding may cause charge build-up and damage the unit.

SPECIFICATIONS

Features	Digital Voltmeter and Current display Output voltage and current can be set by using knobs on the front panel and read from the digital display Constant current/Constant Voltage mode of operation Built-in Arc Protection Circuit
Input Power	208 - 240V AC (50/60Hz) 150W Max power consumption You may order a 200W transformer to run it at 110VAC Power Inlet and Outlet Cable are included
Output Power	DC 0 - 60 kV Single Output, 2.5 mA max Current
Dimensions	214mmL×285mmW×67mmH
Operational Environment	Temperature: 0 - 50 °C Humidity: 10 - 80% RH
Compliance	NRTL certification is available upon request at the extra cost
Warranty	One-year limited warranty with lifetime support
Options	You may need Syringe Pump to deliver liquid, Please click the Pic. 1 below to order. You may need a drum collector to make coating ( Please click Pic. 2 to order) You may order X-Y stage for flat coating, please click Pic. 3 right to order Please put the device into a fume hood for safety and health ( Pic. 4) DIY an Ultrasonic Spray and Electrospinning device Pic. 1 Pic. 2 Pic. 3 Pic. 4
Operation Instructions

You may also like

-65%NEW

Lab Utility 20ml Syringe with Luer Lock Needle for Filling Electrolyte - Syringe20

$4.95

$1.73

-65%NEW

Mini Centrifuge, Blue Lid, 6000 RPM with 16 Adaptors & 8 Tubes, 100-240VAC - VTC-1008-B-LD

$429.00

$150.15

-65%NEW

200°C 20ml Heatable Glass Syringe with Temperature Control Unit for Spin Coater - Syringe20-GLH

$1,498.00

$524.30

-65%NEW

Ni-SS Pulling Cable Set for Dip Coaters PTL-HT, PTL-Cable-HT

$49.98

$17.49

-65%NEW

High Vacuum Chamber (18"x17" x20") with Window For DIY Sputtering coating system - HVC-SS

$9,985.00

$3,494.75

NEW

Capsule Slip Ring FOR VTC-3HD, VTC-1RF, MTI-PSC-CSP

$99.95

-65%NEW

24V DC Oilless Vacuum Pump for MSK-AFA-HC100 - EQ-OFP-24V

$475.00

$166.25

-65%NEW

Heating Element for MSK-AFA-EI300-UL and MSK-AFA-SD300 - MTI-EI300HE1000

$179.00

$62.65

-65%NEW

75ml Glass Solution Beaker for PTL-HT Dip Coater - Beaker75-GL

$8.00

$2.80

-65%NEW

8'' Dia. Pinned Shower Head for CVD Depositions - EQ-SH-8

$1,998.00

$699.30

NEW

KF25 Tee Flange for Secure Vacuum Connection - KF25T

$179.95

-65%NEW

Diamond Head Drill Bit (40mm Length, 0.6mm Dia. Diamond Head, 3.2mm Dia. Drill Bit Body) - EQ-DB-1

$29.95

$10.48