Single Side Conductive Carbon Coated Copper Foil for Battery Anode Substrate (180mm/280mm width x 10 um thick, 1.3 kg/roll) - CCCu-20ss

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

• Better electrical conductivity and less internal resistivity
• Better mechanical strength and toughness to avoid short circuit caused by dendrite growth
• Better coating strength with electrode material
• Therefore, it will provide larger discharging capability and longer service life for Li-Ion batteries

SPECIFICATIONS

Conductive carbon coating	Single side coating with 1-micron thickness Density: 0.54 g/m2 Surface resistivity: < 30 ohms per 25um^2
Substrate of Copper	Purity > 99.9% Thickness: 9 micron Width: 180 mm or 280 mm
Package for sales	1.3 (+/-0.2) kg for roll Length 40 meter
Carbon Coating Width	~ 140 or 240 mm (empty space on each side is 20 mm)
Carbon Coating Thickness	~1 um
The cylinder I,D	7.5 cm
Safety Data Sheet	SDS for Cu. SDS for Conductive Carbon.
Shipping	In vacuum bag
Note & Warning	Please store moisture-sensitive consumables in the vacuum storage box, which will help prevent damages and prolong the integrity of the material. Click here for equipment selection Please always heating the sample under a vacuum oven up to 100-120 °C to remove moisture before use for better results.
Please click picture right to order other battery accessories	Carbon Coated Al Other Chemical Powders,
Please click the video to see how MTI's slitting machine preparing electrode of cylinder batteries