Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by LiMn0.6Fe0.4PO4 (LMFP, 241mm L x 180mm W), 5 sheets/bag - bcaf-lmfpss

This electrode sheet is based on Aluminum foil coated by LiMn0.6Fe0.4PO4 (LMFP) in single side and is used as the cathode of Li-Ion battery - 5 sheets /bag

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: LiMn0.6Fe0.4PO4 (LMFP) 
• Electrode Dimension: 241mm L x 180mm W
• Coated Area: 241mm L x 150mm W ( The edge width of blank area is 15 mm on both sides)
• Single Side Coating Area Density: 14.0±0.2 mg/cm2
• Compaction Density of Coating: 1.9 ±0.1g/cm3
• Current Collector Area Density: 4.05 mg/cm2
• Coating thickness: ~1 um
• Substrate thickness: 15 um
• Active Material Ratio in powder:94.9%
• Specific Capacity: 150 mAh/g at 0.1C
• Charging and Discharging Curve for the First Cycle

• Note: Please vacuum heated dry (80-100oC) before assembling the battery
•