🚚 Free Worldwide Shipping on All Orders!Shop Now
Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=5:2:3, NCM523, 241mm L x 200mm W x 0.103mm T) 5 sheets/bag - bcaf-241NCM-523-ds
HomeStore

Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=5:2:3, NCM523, 241mm L x 200mm W x 0.103mm T) 5 sheets/bag - bcaf-241NCM-523-ds

Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=5:2:3, NCM523, 241mm L x 200mm W x 0.103mm T) 5 sheets/bag - bcaf-241NCM-523-ds

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

  • Material:  LiNiCoMnO2  (Ni:Co:Mn = 5:2:3)
  • Current collector (substrate): Aluminum foil ( 15 microns)
  • Cathode material: Lithium Nickel Manganese Cobalt Oxide
  • Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.  
  • Double sides material density: 23.0 mg/cm2
  • Compaction density: 3.0 g/cm3
  • Active Material Weight: 10.9878g
  • Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 
  • Specific Capacity: 155 mAh/g (0.2C, 4.2-2.7 V vs Li/Li+, Half Cell)
  • Average Cycle Life: 500 Cycles @ 0.2C Charging/Discharging Rate [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]
  • Length: 241mm
  • Width: 200mm
  • Thickness: 103um +/- 5um
    Foil Thickness: 15um +/- 5um
    Coating Thickness: 88um +/- 10um (double side coated)
  • Net Weight: 27.5g
  • Double side coated
  • Qty: 5 sheets/bag
  • Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation

 

  •  for NCM
  •  for Aluminum
$86.80

Original: $248.00

-65%
Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=5:2:3, NCM523, 241mm L x 200mm W x 0.103mm T) 5 sheets/bag - bcaf-241NCM-523-ds—

$248.00

$86.80

Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=5:2:3, NCM523, 241mm L x 200mm W x 0.103mm T) 5 sheets/bag - bcaf-241NCM-523-ds

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

  • Material:  LiNiCoMnO2  (Ni:Co:Mn = 5:2:3)
  • Current collector (substrate): Aluminum foil ( 15 microns)
  • Cathode material: Lithium Nickel Manganese Cobalt Oxide
  • Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.  
  • Double sides material density: 23.0 mg/cm2
  • Compaction density: 3.0 g/cm3
  • Active Material Weight: 10.9878g
  • Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 
  • Specific Capacity: 155 mAh/g (0.2C, 4.2-2.7 V vs Li/Li+, Half Cell)
  • Average Cycle Life: 500 Cycles @ 0.2C Charging/Discharging Rate [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]
  • Length: 241mm
  • Width: 200mm
  • Thickness: 103um +/- 5um
    Foil Thickness: 15um +/- 5um
    Coating Thickness: 88um +/- 10um (double side coated)
  • Net Weight: 27.5g
  • Double side coated
  • Qty: 5 sheets/bag
  • Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation

 

  •  for NCM
  •  for Aluminum

Product Information

Shipping & Returns

Description

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

  • Material:  LiNiCoMnO2  (Ni:Co:Mn = 5:2:3)
  • Current collector (substrate): Aluminum foil ( 15 microns)
  • Cathode material: Lithium Nickel Manganese Cobalt Oxide
  • Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.  
  • Double sides material density: 23.0 mg/cm2
  • Compaction density: 3.0 g/cm3
  • Active Material Weight: 10.9878g
  • Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 
  • Specific Capacity: 155 mAh/g (0.2C, 4.2-2.7 V vs Li/Li+, Half Cell)
  • Average Cycle Life: 500 Cycles @ 0.2C Charging/Discharging Rate [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]
  • Length: 241mm
  • Width: 200mm
  • Thickness: 103um +/- 5um
    Foil Thickness: 15um +/- 5um
    Coating Thickness: 88um +/- 10um (double side coated)
  • Net Weight: 27.5g
  • Double side coated
  • Qty: 5 sheets/bag
  • Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation

 

  •  for NCM
  •  for Aluminum

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

Split Flat Cell O-Ring Set - EQ-STC-RS

$9.99

$3.50

-65%NEW
Thumbnail 1

Split Cell O-Ring Set - EQ-PSC-RS

$9.99

$3.50

-65%NEW
Thumbnail 1

PTFE Guide Sleeve and Spacer w/ optional size 10, 12, 15, 19, 20, 24mm for MTI's Split Cell- EQ-STC-SPTFE

$199.00

$69.65

-65%NEW
Thumbnail 1

Mica Spacers: 50mm OD x 1mm Thick - MICA-SPACERS

$4.95

$1.73

-65%NEW
Thumbnail 1

PTFE Guide Sleeves for MTI's Three-Electrode Split Test Cell - EQ-3ESTC-PS

$99.90

$34.96

-65%NEW
Thumbnail 1

NaPF6 Powder for Sodium-Ion Battery Electrolyte-20g/bottle, SIB-NPF

$339.86

$118.95

-65%NEW
Thumbnail 1Thumbnail 2

PEEK Sleeves for STC-AIR-1 Split Test Cell - LAir1-PSlv

$189.00

$66.15

-65%NEW
Thumbnail 1

Indium (In) Foil Sheet: 100 mm (W) x 100 mm (L) x 0.1 mm (T) - MF-In10010001

$249.00

$87.15

-65%NEW
Thumbnail 1Thumbnail 2

Precision Thickness Checker For Battery Volume Expansion Measurement - PTC-TEM-LD

$3,598.00

$1,259.30

-65%NEW
Thumbnail 1Thumbnail 2

Vanadium Foil (V) Foil: L100 mm x W50 mm x T0.25 mm - MF-V-Foil-100L-0.25T

$398.00

$139.30

-65%NEW
Thumbnail 1

Titanium (Ti) Foil: 110mm Width x 700 mm Length x 0.1mm Thick for Aqueous Battery Current Collector- MF-Ti700L105

$99.00

$34.65

-65%NEW
Thumbnail 1

Zr - Polycrystalline Metallic Foil: 0.08mm thick x 200mm Width x 400 mm Length - MF-Zr-Foil-08Th

$698.00

$244.30