🚚 Free Worldwide Shipping on All Orders!Shop Now
400C Max. Refractory Alloy Die, 1/2" I.D. Dry Pellet Pressing Die - Die-12DHT
HomeStore

400C Max. Refractory Alloy Die, 1/2" I.D. Dry Pellet Pressing Die - Die-12DHT

400C Max. Refractory Alloy Die, 1/2" I.D. Dry Pellet Pressing Die - Die-12DHT

Die-12DHT is a complete pressing die with 0.5 " I.D. is ready for you to make 11- 12 mm diameter sample pellet.

SPECIFICATIONS:

Modle Die-12DHT
Height 2 3/8" (60 mm)
Diameter 2 " OD (50mm)

The whole set pressing die includes
  1. The die is made of Cr12MoV refractory alloy with Max. working Temperature 400ºC
  2. Max. Load: 6 metric Ton
  3. One 0.5" I.D. core die made of hardened steel and highly polished with hardness HRC 50
  4. Ra 0.08μm highly polished steel
  5. One steel sleeve for core dies protection
  6. Two pushing rods highly polished and perfectly fitted into the die
  7. Two steel support plates
  8. One pressing pole for releasing sample from dying only
  9. One steel cylinder for pushing out the sample


Steps to make sample pellet
  • Mixing and grinding chemical powder by agate mortar
  • Calcine mixed the powder in a high temp furnace under suitable temperature
  • Grinding calcined powder again by mortar
  • Put calcined powder into the die
  • Pressing sample by a pressing machine under suitable pressure
  • Take out pellet sample from die
  • Sintering the pellet under suitable temperature
  • Then, a new material sample is formed!

Pressing die installation schematic

Cautions
  • Please must always wear protective goggles during operation !!!
  • Please use alcohol to clean the pressing die every time before use and store it in a dry place with antirust oil after used to avoid rusting on the surface because all pressing dies are made by high-stretched carbon steel for achieving high hardness to meet essential requirements of making ceramic or metal samples. Otherwise, the pressing surface could probably get scratched.
Application Note
  • You may consider using BNMR for easy mold release. Please click the picture below to order.

 

$559.30

Original: $1,598.00

-65%
400C Max. Refractory Alloy Die, 1/2" I.D. Dry Pellet Pressing Die - Die-12DHT—

$1,598.00

$559.30

400C Max. Refractory Alloy Die, 1/2" I.D. Dry Pellet Pressing Die - Die-12DHT

Die-12DHT is a complete pressing die with 0.5 " I.D. is ready for you to make 11- 12 mm diameter sample pellet.

SPECIFICATIONS:

Modle Die-12DHT
Height 2 3/8" (60 mm)
Diameter 2 " OD (50mm)

The whole set pressing die includes
  1. The die is made of Cr12MoV refractory alloy with Max. working Temperature 400ºC
  2. Max. Load: 6 metric Ton
  3. One 0.5" I.D. core die made of hardened steel and highly polished with hardness HRC 50
  4. Ra 0.08μm highly polished steel
  5. One steel sleeve for core dies protection
  6. Two pushing rods highly polished and perfectly fitted into the die
  7. Two steel support plates
  8. One pressing pole for releasing sample from dying only
  9. One steel cylinder for pushing out the sample


Steps to make sample pellet
  • Mixing and grinding chemical powder by agate mortar
  • Calcine mixed the powder in a high temp furnace under suitable temperature
  • Grinding calcined powder again by mortar
  • Put calcined powder into the die
  • Pressing sample by a pressing machine under suitable pressure
  • Take out pellet sample from die
  • Sintering the pellet under suitable temperature
  • Then, a new material sample is formed!

Pressing die installation schematic

Cautions
  • Please must always wear protective goggles during operation !!!
  • Please use alcohol to clean the pressing die every time before use and store it in a dry place with antirust oil after used to avoid rusting on the surface because all pressing dies are made by high-stretched carbon steel for achieving high hardness to meet essential requirements of making ceramic or metal samples. Otherwise, the pressing surface could probably get scratched.
Application Note
  • You may consider using BNMR for easy mold release. Please click the picture below to order.

 

Product Information

Shipping & Returns

Description

Die-12DHT is a complete pressing die with 0.5 " I.D. is ready for you to make 11- 12 mm diameter sample pellet.

SPECIFICATIONS:

Modle Die-12DHT
Height 2 3/8" (60 mm)
Diameter 2 " OD (50mm)

The whole set pressing die includes
  1. The die is made of Cr12MoV refractory alloy with Max. working Temperature 400ºC
  2. Max. Load: 6 metric Ton
  3. One 0.5" I.D. core die made of hardened steel and highly polished with hardness HRC 50
  4. Ra 0.08μm highly polished steel
  5. One steel sleeve for core dies protection
  6. Two pushing rods highly polished and perfectly fitted into the die
  7. Two steel support plates
  8. One pressing pole for releasing sample from dying only
  9. One steel cylinder for pushing out the sample


Steps to make sample pellet
  • Mixing and grinding chemical powder by agate mortar
  • Calcine mixed the powder in a high temp furnace under suitable temperature
  • Grinding calcined powder again by mortar
  • Put calcined powder into the die
  • Pressing sample by a pressing machine under suitable pressure
  • Take out pellet sample from die
  • Sintering the pellet under suitable temperature
  • Then, a new material sample is formed!

Pressing die installation schematic

Cautions
  • Please must always wear protective goggles during operation !!!
  • Please use alcohol to clean the pressing die every time before use and store it in a dry place with antirust oil after used to avoid rusting on the surface because all pressing dies are made by high-stretched carbon steel for achieving high hardness to meet essential requirements of making ceramic or metal samples. Otherwise, the pressing surface could probably get scratched.
Application Note
  • You may consider using BNMR for easy mold release. Please click the picture below to order.

 

You may also like

NEW
Thumbnail 1

50 mm (2") I.D. Dry Pellet Pressing Die - Die-50D

$598.00

NEW
Thumbnail 1Thumbnail 2

75 mm (3") I.D. Dry Pellet Pressing Die - Die75D

$796.00

-65%NEW
Thumbnail 1

25.4 mm (1") Diameter (I.D.) Dry Pellet Pressing Die - Die-25D

$438.00

$153.30

-65%NEW
Thumbnail 1Thumbnail 2

1/2" (12.7mm) I.D. Dry Pellet Pressing Die - Die12DB

$319.95

$111.98

-65%NEW
Thumbnail 1

1" Square Dry Pellet Pressing Die - Die-25S

$899.00

$314.65

-65%NEW
Thumbnail 1

38 mm (1.5") I.D. Dry Pellet Pressing Die - Die-38D

$569.00

$199.15

-65%NEW
Thumbnail 1Thumbnail 2

1/2" (12.7 mm) I.D. Graphite Pellet Pressing Die w/ Pushing Rods-Die-12D-GP

$986.00

$345.10

-65%NEW
Thumbnail 1

1/8" ( I.D. ) Dry Pellet Pressing Die -Die03D

$296.00

$103.60

NEW
Thumbnail 1Thumbnail 2

1/2"(12.7mm) I.D Splitable Graphite Dry Pressing Die. for SPS and RHP Furnace - Die-05D-GP-4S

$349.00

-65%NEW
Thumbnail 1

60mm (2.36") I.D. Dry Pellet Pressing Die - Die-60D

$749.00

$262.15

-65%NEW
Thumbnail 1

30 mm (1.18", I.D.) Dry Pellet Pressing Die - Die-30D

$529.00

$185.15