🚚 Free Worldwide Shipping on All Orders!Shop Now
Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115
HomeStore

Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115

Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115

This aluminum laminated film (111 um) is used as casing material for polymer Li-Ion battery, 100 pcs/Bag.

Specifications

Layers from outside to inside

(Material in bracket)

  • Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
  • Adhesive (Polyester-polyurethane): 4-5g/m2
  • Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
  • Adhesive (Urethane-free Adhesive): 2-3g/m2
  • Polypropylene: 0.040mm(+-0.004mm)

Thickness:

  • 113μm±11μm

Width

  • 100mm

Length

  • 115mm

Surface quality

  • Mat finish

Pinholes

  • Subject to the applicable aluminum foil standard

Impurity

  • 1mm or less in diameter

Fish eye

  • 2mm or less in diameter(clear)
  • 1mm or less in diameter(colored) 

Moisture Vapor / O2 Transmission Rate
  • 200ppm / 5 years @ 300K

Laminate strength

  • Nylon/Al more than 2N/15mm
  • Al/CPP more than 5N/15mm

Heat seal strength

  • More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing
  • equipment MSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

  • Less than 5mg/m2

Appearance

  • Within the sample of the limit

Slip factor

  • CPP/CPP less than 1.0



Video
Click the picture to see the finished polymer Li-ion Battery made by heated Sealer
Click the video to see how to make pouch cell

 

 

 

 

$258.00
Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115—
$258.00

Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115

This aluminum laminated film (111 um) is used as casing material for polymer Li-Ion battery, 100 pcs/Bag.

Specifications

Layers from outside to inside

(Material in bracket)

  • Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
  • Adhesive (Polyester-polyurethane): 4-5g/m2
  • Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
  • Adhesive (Urethane-free Adhesive): 2-3g/m2
  • Polypropylene: 0.040mm(+-0.004mm)

Thickness:

  • 113μm±11μm

Width

  • 100mm

Length

  • 115mm

Surface quality

  • Mat finish

Pinholes

  • Subject to the applicable aluminum foil standard

Impurity

  • 1mm or less in diameter

Fish eye

  • 2mm or less in diameter(clear)
  • 1mm or less in diameter(colored) 

Moisture Vapor / O2 Transmission Rate
  • 200ppm / 5 years @ 300K

Laminate strength

  • Nylon/Al more than 2N/15mm
  • Al/CPP more than 5N/15mm

Heat seal strength

  • More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing
  • equipment MSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

  • Less than 5mg/m2

Appearance

  • Within the sample of the limit

Slip factor

  • CPP/CPP less than 1.0



Video
Click the picture to see the finished polymer Li-ion Battery made by heated Sealer
Click the video to see how to make pouch cell

 

 

 

 

Product Information

Shipping & Returns

Description

This aluminum laminated film (111 um) is used as casing material for polymer Li-Ion battery, 100 pcs/Bag.

Specifications

Layers from outside to inside

(Material in bracket)

  • Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
  • Adhesive (Polyester-polyurethane): 4-5g/m2
  • Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
  • Adhesive (Urethane-free Adhesive): 2-3g/m2
  • Polypropylene: 0.040mm(+-0.004mm)

Thickness:

  • 113μm±11μm

Width

  • 100mm

Length

  • 115mm

Surface quality

  • Mat finish

Pinholes

  • Subject to the applicable aluminum foil standard

Impurity

  • 1mm or less in diameter

Fish eye

  • 2mm or less in diameter(clear)
  • 1mm or less in diameter(colored) 

Moisture Vapor / O2 Transmission Rate
  • 200ppm / 5 years @ 300K

Laminate strength

  • Nylon/Al more than 2N/15mm
  • Al/CPP more than 5N/15mm

Heat seal strength

  • More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing
  • equipment MSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

  • Less than 5mg/m2

Appearance

  • Within the sample of the limit

Slip factor

  • CPP/CPP less than 1.0



Video
Click the picture to see the finished polymer Li-ion Battery made by heated Sealer
Click the video to see how to make pouch cell

 

 

 

 

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

Split Flat Cell O-Ring Set - EQ-STC-RS

$9.99

$3.50

-65%NEW
Thumbnail 1

Split Cell O-Ring Set - EQ-PSC-RS

$9.99

$3.50

-65%NEW
Thumbnail 1

PTFE Guide Sleeve and Spacer w/ optional size 10, 12, 15, 19, 20, 24mm for MTI's Split Cell- EQ-STC-SPTFE

$199.00

$69.65

-65%NEW
Thumbnail 1

Mica Spacers: 50mm OD x 1mm Thick - MICA-SPACERS

$4.95

$1.73

-65%NEW
Thumbnail 1

PTFE Guide Sleeves for MTI's Three-Electrode Split Test Cell - EQ-3ESTC-PS

$99.90

$34.96

-65%NEW
Thumbnail 1

NaPF6 Powder for Sodium-Ion Battery Electrolyte-20g/bottle, SIB-NPF

$339.86

$118.95

-65%NEW
Thumbnail 1Thumbnail 2

PEEK Sleeves for STC-AIR-1 Split Test Cell - LAir1-PSlv

$189.00

$66.15

-65%NEW
Thumbnail 1

Indium (In) Foil Sheet: 100 mm (W) x 100 mm (L) x 0.1 mm (T) - MF-In10010001

$249.00

$87.15

-65%NEW
Thumbnail 1Thumbnail 2

Precision Thickness Checker For Battery Volume Expansion Measurement - PTC-TEM-LD

$3,598.00

$1,259.30

-65%NEW
Thumbnail 1Thumbnail 2

Vanadium Foil (V) Foil: L100 mm x W50 mm x T0.25 mm - MF-V-Foil-100L-0.25T

$398.00

$139.30

-65%NEW
Thumbnail 1

Titanium (Ti) Foil: 110mm Width x 700 mm Length x 0.1mm Thick for Aqueous Battery Current Collector- MF-Ti700L105

$99.00

$34.65

-65%NEW
Thumbnail 1

Zr - Polycrystalline Metallic Foil: 0.08mm thick x 200mm Width x 400 mm Length - MF-Zr-Foil-08Th

$698.00

$244.30