🚚 Free Worldwide Shipping on All Orders!Shop Now
Nickel Foam (L 200mm x W 300mm x T 5mm) - bcnf-5
Specifications
-
Material: Nickel Foam, Purity> 99.99% (excellent anti-corrosive)
-
Sold in one pieceSurface Density: 800g/m^2
-
Length: 200 mm
-
Width: 300mm
-
Thickness: 5mm
-
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile StrengthLengthwise≥1.25N/mm^2; Widthwise≥1.00N/mm^2
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of the nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
- Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol were used for 5 min each to ensure the surface of the Ni foam was well cleaned.
  Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
 Click the video above to see the battery cathode coated by MTI's Film coater MSK-AFA-II-VC |
 Other Metallic Foams |
$368.00
Nickel Foam (L 200mm x W 300mm x T 5mm) - bcnf-5—
$368.00
Nickel Foam (L 200mm x W 300mm x T 5mm) - bcnf-5
Specifications
-
Material: Nickel Foam, Purity> 99.99% (excellent anti-corrosive)
-
Sold in one pieceSurface Density: 800g/m^2
-
Length: 200 mm
-
Width: 300mm
-
Thickness: 5mm
-
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile StrengthLengthwise≥1.25N/mm^2; Widthwise≥1.00N/mm^2
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of the nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
- Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol were used for 5 min each to ensure the surface of the Ni foam was well cleaned.
|
Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
Click the video above to see the battery cathode coated by MTI's Film coater MSK-AFA-II-VC |
Other Metallic Foams |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Specifications
-
Material: Nickel Foam, Purity> 99.99% (excellent anti-corrosive)
-
Sold in one pieceSurface Density: 800g/m^2
-
Length: 200 mm
-
Width: 300mm
-
Thickness: 5mm
-
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile StrengthLengthwise≥1.25N/mm^2; Widthwise≥1.00N/mm^2
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of the nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
- Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol were used for 5 min each to ensure the surface of the Ni foam was well cleaned.
|
Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
Click the video above to see the battery cathode coated by MTI's Film coater MSK-AFA-II-VC |
Other Metallic Foams |
