0.5 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-05m
0.5 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-05m
Nickel Foam for Battery Cathode Substrate (1000mm length x 200mm width x 0.5 mm thickness) EQ-bcnf-05m
Specifications
-
Material: Nickel Foam, (excellent anti-corrosive)
Purity: > 99.9 wt %
Impurity: C≤200S≤80Fe≤100Cu≤100Si≤50 ( ppm) -
Surface Density: 346 g/m^2
- Length: 1meter
- Width: 200mm
- Thickness: 0.5 mm
- Net weight: 104g
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile Strength Lengthwise ≥1.25N/mm^2; Widthwise≥1.00N/mm^2
-
Sold in roll only
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
-
Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol was used for 5 min each to ensure the surface of the Ni foam was well cleaned.
  Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
 |
 Other Metallic Foams |
Related Product
 Battery Powders |
 Heatable Ultrasonic Cleaner |
 Electrode Coating |
 Coin Cell Assembling |
 Pouch Cell Assembling |
 Cylinder Cell Assembling |
 Electrolyte injection |
0.5 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-05m
Nickel Foam for Battery Cathode Substrate (1000mm length x 200mm width x 0.5 mm thickness) EQ-bcnf-05m
Specifications
-
Material: Nickel Foam, (excellent anti-corrosive)
Purity: > 99.9 wt %
Impurity: C≤200S≤80Fe≤100Cu≤100Si≤50 ( ppm) -
Surface Density: 346 g/m^2
- Length: 1meter
- Width: 200mm
- Thickness: 0.5 mm
- Net weight: 104g
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile Strength Lengthwise ≥1.25N/mm^2; Widthwise≥1.00N/mm^2
-
Sold in roll only
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
-
Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol was used for 5 min each to ensure the surface of the Ni foam was well cleaned.
|
Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
|
Other Metallic Foams |
Related Product
|
Battery Powders |
Heatable Ultrasonic Cleaner |
Electrode Coating |
Coin Cell Assembling |
Pouch Cell Assembling |
Cylinder Cell Assembling |
Electrolyte injection |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Nickel Foam for Battery Cathode Substrate (1000mm length x 200mm width x 0.5 mm thickness) EQ-bcnf-05m
Specifications
-
Material: Nickel Foam, (excellent anti-corrosive)
Purity: > 99.9 wt %
Impurity: C≤200S≤80Fe≤100Cu≤100Si≤50 ( ppm) -
Surface Density: 346 g/m^2
- Length: 1meter
- Width: 200mm
- Thickness: 0.5 mm
- Net weight: 104g
- Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm)
- Extensibility: Lengthwise≥5%; Widthwise≥12%
- Tensile Strength Lengthwise ≥1.25N/mm^2; Widthwise≥1.00N/mm^2
-
Sold in roll only
- Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of nickel.
- How to clean the Nickel Foam for Battery Cathode Substrate.
- It can be removed the NiO by annealing in the hydrogen furnace.
-
Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol was used for 5 min each to ensure the surface of the Ni foam was well cleaned.
|
Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm |
|
Other Metallic Foams |
Related Product
|
Battery Powders |
Heatable Ultrasonic Cleaner |
Electrode Coating |
Coin Cell Assembling |
Pouch Cell Assembling |
Cylinder Cell Assembling |
Electrolyte injection |
